Unraveling the Flying Leap of a Flea

  • Thread starter Thread starter MozAngeles
  • Start date Start date
  • Tags Tags
    Flying
AI Thread Summary
The discussion revolves around analyzing high-speed motion pictures of a flea's jump to determine its maximum height and acceleration. Participants share methods for calculating the flea's maximum height at 2.5 ms, with one user estimating it to be about 0.25 cm using the area under the graph rather than traditional kinematics equations. They suggest that similar calculations can be applied to find the flea's height at 0.5 ms, 1.0 ms, and 1.5 ms by evaluating the areas of triangles and rectangles on the graph. The conversation emphasizes using graphical data for accurate estimations in physics problems. Overall, the thread highlights the importance of visual data interpretation in solving kinematic questions.
MozAngeles
Messages
100
Reaction score
0

Homework Statement


High-speed motion pictures 3500 (frames/second) of a jumping, 210 μg flea yielded the data used to plot the graph given in the figure . (See "The Flying Leap of the Flea" by M. Rothschild, Y. Schlein, K. Parker, C. Neville, and S. Sternberg in the November 1973 Scientific American.) This flea was about 2 mm long and jumped at a nearly vertical take-off angle. Use the graph to answer the questions.
YF-02-42.jpg


Find the maximum height the flea reached in the first 2.5 {\rm ms}.
Find the flea's acceleration at 0.5 {\rm ms}.

Homework Equations



the kinematics equations
x= .5at2+ v0+ x0
v= at + v0
...

The Attempt at a Solution


hmax=1/2g*t
after converting everything to the right units i got .0031 cm which was wrong... help meh please?
 
Physics news on Phys.org
how do you know it was wrong? do you have the answer? I've done a quick estimate giving 0.25ish cm. if that's closer I'll explain how I did it.
 
Last edited:
yeah that's the correct answer! :) how did you do it?
 
Well... I didn't use any formulae in my estimation really, I just used the fact that the distance traveled = the area under the graph...

if you do it in two halves (triangular and rectangular)
you get height (distance traveled upwards buy flea) = (1/2)*(1/1000 sec)*(125 cm/sec) + ((2.5-1)/1000 sec)*(125 cm/sec) = about 0.25cm

this is actually a fair approximation as the extra bit added to the rectangle at the top left corner by taking the left hand edge as 1ms compensates for the bit missing from the triangle caused by the fact that the slope upwards in concave

There may be a more "mathsy" way of doing this, perhaps more accurately, but the question does after all say "Use the graph to answer the questions."

Hope this helps!

Will
 
could you use the same concept to find the flea's height at 0.5 ms, 1.0, and 1.5 ms??
 
I don't see why not? just work out the area under the graph in terms of triangles and rectangles up to those times on the x-axis.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

The Flying Leap of the Flea: Analyzing Acceleration and Forces
Replies
10
Views
13K

Hot Threads

Recent Insights

Back
Top