Upward Normal Force Exerted by Floor on Elevator Passenger

AI Thread Summary
The upward normal force exerted by the floor on an elevator passenger is 620N, while the passenger's weight is 650N. The problem involves calculating acceleration using the equation F=ma, where mass is derived from weight (w=mg). A key point of confusion is whether to subtract the normal force from weight or vice versa when determining net force; the correct approach is to consider the direction of forces and maintain proper signs. The discussion emphasizes that the normal force acts against gravity, and the net force should reflect the direction of acceleration. Understanding these principles clarifies the relationship between normal force, weight, and acceleration in an elevator scenario.
Heat
Messages
272
Reaction score
0

Homework Statement



The upward normal force exerted by the floor is 620N on an elevator passenger who weighs 650N.


Homework Equations



F=ma

The Attempt at a Solution



I am reviewing all the Homework assigned so, I do got the answers. :)

Anyways, the way I set this problem up was F=ma.

First we need to know the mass, which we get by w=mg.

650 = m9.8
m = 66.33

now we plug into F=ma.

Fnet = 66.33a

I managed to get the acceleration of .455 , but my question here is , why is the net force 620-650 and not 650-620.

Do we always subtract from the smaller force first? My first instinct was since gravity was larger it would be 650-620.

What if it was this instead: "The upward normal force exerted by the floor is 700N on an elevator passenger who weighs 100N."?

Would it be normal force-w or will it still be w-n. ?

I just need a clarification. o:)
 
Last edited:
Physics news on Phys.org
what exactly does the problem ask you to find? The normal force is less because the elevaotr is accelerating in what direction to make the passenger weight less?
 
It tells me to find acceleration.

I did of -.455

I know because of it being negative it goes down.

but

what if I subtracted 650-620 = 30
then it would be 30/66.33 = .455

a would be positive.
 
"My first instinct was since gravity was larger it would be 650-620"

the normal force acts against the downward direction.

so u can think of it as 620N + (-650N) .
"Do we always subtract from the smaller force first? My first instinct was since gravity was larger it would be 650-620. "

no, Newtons law is addition of forces so u need to keep your +/- sings with respect to the directions.
 
Last edited:
Your first problem is that w=mg not ma.
 
Gravity is commonly measured in units of m s-2, (metres per second squared). hmmm
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top