Vacuum Technology Research - Sagar's Project

  • Thread starter Thread starter sagarchand
  • Start date Start date
  • Tags Tags
    Technology
AI Thread Summary
Sagar is developing a large-scale vacuum cleaner for road cleaning and seeks technical details, including pressure drop calculations, nozzle size, and suitable fan specifications. Aditya inquires about the appropriateness of using a conventional motor for this industrial vacuum design. Participants are encouraged to share resources and formulas related to vacuum technology. The discussion emphasizes the need for precise engineering to ensure effective operation. Technical guidance on components and design considerations is crucial for the project's success.
sagarchand
Messages
1
Reaction score
0
Hi everybody,
I'm working on a project which deals with making a vacuum cleaner huge in size to clean the roads. So..i'm looking for some formulas and calcuations to calculate the pressure drop need to be created, the size of the nozzle, the adoptable fan/impeller/blower etc.

where can i find such stuff..means i want every technical detail of a vacuum cleaner.


thanks,
/sagar
 
Engineering news on Phys.org
hello everyone,
I need to create an industrial size vacuum cleaner, could someone please help me out on which fan should be sufficient, whether a conventional motor is suitable to design the same??

aditya
 
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Thread No-Go plug gage allows 3 turns to enter. That's too many!'

After over 25 years of engineering, designing and analyzing bolted joints, I just learned this little fact. According to ASME B1.2, Gages and Gaging for Unified Inch Screw Threads: "The no-go gage should not pass over more than three complete turns when inserted into the internal thread of the product. " 3 turns seems like way to much. I have some really critical nuts that are of standard geometry (5/8"-11 UNC 3B) and have about 4.5 threads when you account for the chamfers on either...
View full post »

Similar threads

Misc. MIT Think Competition Project — Farming Robot
Replies
13
Views
2K
Misc. Bicycle Design (Individual Project)
Replies
10
Views
3K
MATLAB MATLAB API For Wave Flume Data Analysis
Replies
3
Views
3K
What Career Path Will Bring You Joy and Fulfillment?
Replies
10
Views
2K
Countdown to Doom Release: Revisit the Original and Celebrate with Easter Eggs
Replies
14
Views
4K
News Air Purifiers are a Ripoff - Whirlpool ap51030k
Replies
18
Views
42K
How bright is the future of Maglev Cars?
Replies
19
Views
11K
The Scientist as Hero - or not
Replies
1
Views
3K
Is the NERVA Program's Decline a Setback for Nuclear Space Propulsion?
Replies
2
Views
3K
Is the Future of Space Exploration Dependent on Nuclear Thermal Rockets?
Replies
1
Views
5K

Hot Threads

Recent Insights

Back
Top