Water falling into bucket, Force question

AI Thread Summary
Water falls at a rate of 271 g/s from a height of 56.2 m into a bucket weighing 776 g. After 3.14 seconds, the total mass of water collected is approximately 0.851 kg, leading to a combined weight of 1.63 kg. The force calculation initially yields 15.9 N, but it does not account for the additional force needed to stop the water's momentum. The distance is relevant for determining the water's speed upon impact, calculated as 17.9 m/s. The discussion highlights the importance of correctly interpreting the time and speed of the falling water to solve the problem accurately.
Leeoku
Messages
18
Reaction score
0

Homework Statement


13. Water falls at the rate of 271 g/s from a height of 56.2 m into a 776g bucket on a scale (without splashing). If the bucket is originally empty, what does the scale read after 3.14 s?
Answer: 2.50e+01 N



Homework Equations


Density, estimate 1kg/m^3
F = ma (a = gravity)
1kg = 1L


The Attempt at a Solution


In 3 seconds, .271*3 = .851 L dropped->.851 KG
Add weight of bucket, .851+.776 = 1.63 kg
F =ma
= 15.9 N
 
Physics news on Phys.org
You found the weight of the water + bucket. Good! But an additional force is required to stop the momentum of the flowing water.
 
i actually have no clue. what I am puzzled at is why they gave us distance. the first thing that comes to mind is work, but i don't think that helps..
 
Leeoku said:
i actually have no clue. what I am puzzled at is why they gave us distance. the first thing that comes to mind is work, but i don't think that helps..
They gave you the distance so you can figure out the speed of the water as it hits the bucket. Hint: Use that speed to find the rate of change of the momentum of the water as it hits the bucket.
 
ok using v=d/t, 56.2/3.14 = 17.9 m/s
Impulse = delta p = (sum F)delta T
Delta p = 15.9*3.14
= 50 N.s
Using 50 as momentum, p = mv
50 = 17.89 M
m = 2.8 kg

Weird part is answer is given in Newtons, so mass*g = 27.4 N. Still not right, close though..
 
Leeoku said:
ok using v=d/t, 56.2/3.14 = 17.9 m/s
Two problems:
(1) The 3.14 s time given is not the time it takes for the water to fall from the given height.
(2) The speed of the water is not constant as it falls.

To find the speed of the water as it hits the scale, treat it as a falling body (falling from rest through a height of 56.2 m).
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top