Is the relationship between water pressure and gravity a direct correlation?

AI Thread Summary
The relationship between water pressure and gravity is direct and linear, meaning that if gravity decreases, the crush depth of a submersible increases proportionally. For example, a submersible with a crush depth of 1000 feet on Earth could withstand a depth of 4000 feet on a planet with one-fourth of Earth's gravity. However, factors like gravitational force variations with distance and the slight compressibility of water can influence this relationship, though they are often negligible in practical scenarios. Water resistance, or drag, is primarily determined by the fluid's density and viscosity, rather than pressure. Overall, while gravity affects water pressure, other factors like surface tension and fluid properties also play significant roles in fluid dynamics.
Lelan Thara
Messages
59
Reaction score
0
I hope this is the best sub-forum for this question:

How direct is the relationship between water pressure and the weight of the water, as determined by the local gravity where the water is?

In other words - let's say we have a submersible with a crush depth of 1000 feet on Earth. If we moved that submersible to a watery planet with one fourth of Earth's gravity - would the crush depth become 4000 feet?

To phrase it another way - if I had a body of water large enough to swim in in a microgravity environment - would the water offer any resistance as I swam through it?

Do issues of surface tension, friction, viscosity and so so on play a significant role in determining water pressure? Or is it a simple direct correlation between water pressure and gravity - half the gravity means half the water pressure for equal volumes of water?

Thanks very much.
 
Physics news on Phys.org
Lelan Thara said:
How direct is the relationship between water pressure and the weight of the water, as determined by the local gravity where the water is?
Direct, linear.
In other words - let's say we have a submersible with a crush depth of 1000 feet on Earth. If we moved that submersible to a watery planet with one fourth of Earth's gravity - would the crush depth become 4000 feet?
Yep. Since the pressure is simply the weight of the column of water above the submersible, if the water weighs one fourth as much, it can go four times as deep. Two caveats:

1. Gravitational force changes with distance from the center of a body.
2. Water is not completely incompressible.

On earth, anyway, these two considerations are essentially irrelevant, but they may not be on your hypothetical other planet.
To phrase it another way - if I had a body of water large enough to swim in in a microgravity environment - would the water offer any resistance as I swam through it?

Do issues of surface tension, friction, viscosity and so so on play a significant role in determining water pressure?
Yes! (to both questions) Resistance to motion in water has nothing to do with the pressure of the water (same caveats as above, though). The resistance (and this goes for air too) is based on the density and viscosity of the fluid, and sometimes compressibility.

Surface tension, itself will only affect motion on the surface.

We may move this thread...
 
i always wondered how pressure as a function of depth was affected by irregular containers. i keep thinking of sensible ways to calculate it that give absurd results in certain configurations
 
Thank you, Russ. One further question about your statement below:


russ_watters said:
Yes! (to both questions) Resistance to motion in water has nothing to do with the pressure of the water (same caveats as above, though). The resistance (and this goes for air too) is based on the density and viscosity of the fluid, and sometimes compressibility.

Surface tension, itself will only affect motion on the surface.

Since water is very slightly compressible - and that compression, in a natural deep water environment, would come from the weight of the water - would I expect somewhat less water resistance in a lower gravity environment?
 
Water is essentially incompressible, meaning that the difference in figures like "water resistance," by which I assume you mean drag, are only affected in a negligible way. You are correct, though, that the slight compressibility means that deep water is denser than shallow water, even with all other factors like temperature held constant. Denser water means, of course, more drag on a submersible vehicle. Again though, this effect is so tiny that it can be ignored, even on other planets.

- Warren
 
Hi there, im studying nanoscience at the university in Basel. Today I looked at the topic of intertial and non-inertial reference frames and the existence of fictitious forces. I understand that you call forces real in physics if they appear in interplay. Meaning that a force is real when there is the "actio" partner to the "reactio" partner. If this condition is not satisfied the force is not real. I also understand that if you specifically look at non-inertial reference frames you can...
I have recently been really interested in the derivation of Hamiltons Principle. On my research I found that with the term ##m \cdot \frac{d}{dt} (\frac{dr}{dt} \cdot \delta r) = 0## (1) one may derivate ##\delta \int (T - V) dt = 0## (2). The derivation itself I understood quiet good, but what I don't understand is where the equation (1) came from, because in my research it was just given and not derived from anywhere. Does anybody know where (1) comes from or why from it the...
Back
Top