What is the mass of the string?

  • Thread starter Thread starter timtng
  • Start date Start date
  • Tags Tags
    Spring
AI Thread Summary
The discussion focuses on calculating the mass of a string under tension and the required tension for specific vibrations. The calculations show that with an 18 N tension, the mass of the 2.00 m string is 0.0001 kg. For the string to vibrate in three segments at 150 Hz, a tension of 2 N is needed. The methods used involve wave speed equations relating frequency, tension, and linear density. Overall, the calculations for both parts of the problem are confirmed to be correct.
timtng
Messages
25
Reaction score
0
When the tension is 18 N, a string 2.00 m long has a fundamental frequency of 150 Hz.
a.) What is the mass of the string?
b.) With what tension must the string be stretched so that it vibrates in three segments at 150 Hz?

This is what I came up with:
a.) f=v/2L, v=2Lf=2*2*150=600 m/s
v=sqrt(T/μ), v^2=T/μ, μ=T/v^2=18/600^2=.00005 kg/m
M=2*.00005=.0001 kg

b.) L=3λ/2, 2=3λ/2, λ=4/3
v=fλ=150*4/3=200 m/s
v^2=T/μ, T=μ*v^2=.00005*200^2=2 N

Am I working both problems correctly?

Thanks
 
Physics news on Phys.org
Your physics looks good. (I didn't check the arithmetic :wink:)
 
for your response! Your calculations for both problems seem to be correct. In part a), you correctly used the equation for the speed of a wave (v) in terms of its frequency (f) and wavelength (λ) to solve for the linear density (μ) of the string. And in part b), you correctly used the equation for the speed of a wave (v) in terms of its tension (T) and linear density (μ) to solve for the tension needed for the string to vibrate in three segments at 150 Hz. Keep up the good work!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top