What is the Minimum Detectable Power of a Light Flash on a Silicon Solar Cell?

AI Thread Summary
The discussion revolves around calculating the minimum detectable power of a light flash on a silicon solar cell, given a specific current threshold of 0.42 µA and a flash duration of 0.25 seconds. The initial calculation for energy used the formula E = h*f, leading to an energy value of 3.62*10^-19 J for a wavelength of 550 nm. The user attempted to find power by dividing energy by time, resulting in an incorrect power value. The conversation highlights the importance of considering the number of photons needed to generate the required current, emphasizing that each photon can produce a charge carrier. Understanding the relationship between current and the number of photons is crucial for solving the problem accurately.
Sarah88
Messages
14
Reaction score
0

Homework Statement



A circuit employs a silicon solar cell to detect flashes of light lasting .25 seconds. The smallest current the circuit can detect reliably is .42 \muA. Assuming that all photons reaching the solar cell give their energy to a charge carrier, what is the minimum power of a flash of light of wavelength 550 nm that can be detected?


Homework Equations



E= h*f
f= c/wavelength

The Attempt at a Solution


I first found the energy by h*(c/wavelength) --> 6.63*10^-34 m^2 kg/s * (3*10^8 m/s)/(550*10^-9 m) = 3.62*10^-19 J. Since 1 W= 1 J/s, I took the energy and divided it by the time of .25 seconds (to get an answer of 1.45*10^-18 W). However, this answer is wrong, was I wrong in neglecting the current in the circuit? Does this end up changing the J of energy? I know P can equal I*V, or I^2*R, but I'm not sure how to incorporate power with current in this sort of problem. Thank you!
 
Physics news on Phys.org
Think in terms of counting how many photons are required. The problem states (essentially) that each photon can produce a charge carrier for the current. How many charge carriers does it take to produce the required current for the required time?
 
Ok, that makes sense, thank you! :)
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top