What Is the Velocity of a Ladybug on a Moving Chair Relative to the Ground?

AI Thread Summary
The discussion focuses on calculating the velocity of a ladybug crawling on a chair being pulled at an angle. The ladybug's velocity is 10.0 mm/s west, while the chair's velocity is 40.0 mm/s at 50 degrees north of west. The resultant velocity of the ladybug relative to the ground is calculated to be approximately 47.1 mm/s at an angle of 40.6 degrees north of west. Participants confirm the calculations are correct but suggest paying attention to significant figures. The final answer is validated as accurate before submission.
quicksilver123
Messages
173
Reaction score
0

Homework Statement


A ladybug with a velocity of 10.0mm/s [W] crawls on a chair that is being pulled [50deg N of W] at 40.0mm/s. What is the velocity of the ladybug, relative to the ground?

Homework Equations



pythag theorum
component vectors
sohcahtoa

The Attempt at a Solution



Let [N] and [W] be positive.

Velocity of the ladybug relative to the chair = VLC = 10mm/s [W]
Components:
VLCx = 10mm/s
VLCy = 0mm/s

Velocity of the chair, relative to the ground = VCG = 40mm/s [W50degN]
Components:
VCGx = 40mm/s (cos50) = 25.71150439mm/s
VCGy = 40mm/s (sin50) = 30.64177772mm/s

Velocity of the ladybug, relative to the ground = VLG = ?
Components:
VLGx = VLCx + VCGx = 35.71150439mm/s
VLGy = VLCy + VCGy = 30.64177772mm/s

Direction of VLG
∅ (theta?) = tan-1(opposite/adjacent)
= tan-1(VLGy / VLGx)
= tan-1(30.64177772mm/s / 35.71150439mm/s)
= 40.63 degrees

∴ VLG = √2214.230088 = 47.05560634mm/s [ W 40.63deg N ]I feel that my calculations are correct.
However, looking up this question on the net shows that people have come to a different end result:
https://www.physicsforums.com/showthread.php?t=596229

Specifically, the direction of the resultant vector is different.
I just want to be sure that my answer is correct before I submit it for marking.
Thanks.
 
Last edited:
Physics news on Phys.org
quicksilver123 said:

Homework Statement


A ladybug with a velocity of 10mm/s [W] crawls on a chair that is being pulled [50deg N of W] at 40.0mm/s. What is the velocity of the ladybug, relative to the ground?


Homework Equations



pythag theorum
component vectors
sohcahtoa

The Attempt at a Solution



Let [N] and [W] be positive.

Velocity of the ladybug relative to the chair = VLC = 10mm/s [W]
Components:
VLCx = 10mm/s
VLCy = 0mm/s

Velocity of the chair, relative to the ground = VCG = 40mm/s [W50degN]
Components:
VCGx = 40mm/s (cos50) = 25.71150439mm/s
VCGy = 40mm/s (sin50) = 30.64177772mm/s

Velocity of the ladybug, relative to the ground = VLG = ?
Components:
VLGx = VLCx + VCGx = 35.71150439mm/s
VLGy = VLCy + VCGy = 30.64177772mm/s

Direction of VLG
∅ (theta?) = tan-1(opposite/adjacent)
= tan-1(VLGy / VLGx)
= tan-1(30.64177772mm/s / 35.71150439mm/s)
= 40.63 degrees

∴ VLG = √2214.230088 = 47.05560634mm/s [ W 40.63deg N ]


I feel that my calculations are correct.
However, looking up this question on the net shows that people have come to a different end result:
https://www.physicsforums.com/showthread.php?t=596229

Specifically, the direction of the resultant vector is different.



I just want to be sure that my answer is correct before I submit it for marking.
Thanks.

The result of your calculations look okay. You might want to do something about significant figures for the final value before handing it in.
 
I haven't really done much math this year. From what I recall, you use the given values in determining the amount of significant digits... you choose the number that has the least amount of sig. digits.

Both 40.0mm/s and 10.0mm/s have three sig digits.

So...
The final, rounded answer should be:

VLG = = 47.1mm/s [ W 40.6deg N ]

Correct?
 
Looks good.
 
Thanks bros (and broettes).
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top