Where Are Electron-Hole Pairs Created in Solar Cells?

AI Thread Summary
In solar cells, electron-hole pairs are generated throughout the semiconductor but primarily contribute to power generation when formed in the depleted region of the pn-junction. These pairs quickly recombine unless they are separated by the built-in electric field, which directs electrons to the n-type side and holes to the p-type side. This separation creates excess charge carriers, leading to a flow of current when the terminals are connected. The role of the electric field is crucial for efficient energy conversion in solar cells. Understanding this mechanism is essential for optimizing solar cell performance.
properphysicist
Messages
10
Reaction score
0
When power is generated in a solar cell, it is because of irradiance of radiation on a pn-junction. But in which part of the junction are the electron-hole pairs created? Is it just the depleted region or are they also created in the n- and p-type semiconductors?

An engineer's response would be for me to consider a current source in parallel with a diode but I need a physicists response. What the heck is going on in a solar cell?

I'd be grateful for any help, thanks.
 
Physics news on Phys.org
properphysicist said:
When power is generated in a solar cell, it is because of irradiance of radiation on a pn-junction. But in which part of the junction are the electron-hole pairs created? Is it just the depleted region or are they also created in the n- and p-type semiconductors?


I'd be grateful for any help, thanks.

The electron-hole pairs can be generated anywhere in a semiconductor, but they would recombine at once and nothing would happen unless they were formed in the depleted region and sucked away at opposite directions by the "built-in" electric field there. You know that positive charges are accumulated at the n type side near the junction and negative charges at the p type side. So the electron-hole pair will be separated, the electron moving into the n side and the hole moving into the p side. This results excess charge on both sides, and connecting the terminals you get current.


ehild
 
Thank-you echild. That answer is quite helpful.
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top