Which student is correct when bulb C is removed?

  • Thread starter Thread starter EV33
  • Start date Start date
  • Tags Tags
    Bulb
AI Thread Summary
When bulb C is removed from the circuit, student one argues that bulb B will become brighter because it no longer shares current with bulb C. Student two contends that the overall resistance of the circuit increases, leading to a decrease in current and making bulb B dimmer. The analysis shows that removing bulb C actually increases the current flowing through bulb B, confirming student one's perspective. The calculations indicate that bulb B will be 1.5 times brighter after bulb C is removed. Thus, the correct conclusion is that bulb B becomes brighter when bulb C is removed.
EV33
Messages
192
Reaction score
0
Which bulb is brighter :)

b]1. Homework Statement [/b]
There is a circuit with a voltage V, and 3 identical bulbs of resistance R. B and C are parallel to each other, and A is in series to them.
what happens when bulb c is removed?
student one: I think that bulb B will get brighter. Bulb B used to share the current with bulb C, but now it gets all the current. So bulb B will get brighter.
student 2: I don't think so. Now there aren't as many paths for the current, so the resistance in the circuit has increased. Since the resistance in the circuit has gone up, the current in the circuit decreases. Bulb B will get dimmer.
Which student is correct?

Homework Equations


1. Sum of all current into a node is the sum of the current out of the node.
2. The sum of voltage on a closed loop is equal to zero.
3. V=IR

The Attempt at a Solution


Well I agree with student one in the part where bulb B doesn't have to share the current with bulb C anymore so the amount of current going to B is increased, but student 2 makes a great point too. He says that because bulb C is gone that the amount of resistance in the circuit is increased.


So from here I made the resistors into equivalent resistors in order to find the current that would be going through B in both cases.

The first case I get the equivalent resistor to have an Resistance=(2/R)^(-1)+R=3/R

So using V=IR, I get the equivalent I to be equal to 2V/(3R).

so that would mean that to current going to B individually would be half... V/(3R).


The second case without C I Get an equivalent resistance to be R+R=2R, and so the I=V/(2R).


Therefore when C is removed, the current also goes up for B making B brighter, and makeing student 2 wrong.


Is this correct reasoning? I am a still a little uncomfortable with circuits.
 
Physics news on Phys.org


Your analysis is OK.

Bulb B should be 1.5 times brighter and bulb B's brightness will be reduced to 75% of previous value.
 


Thank you very much
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top