My Car Battery: Should I Replace It?

  • Thread starter Thread starter Clausius2
  • Start date Start date
  • Tags Tags
    Battery Car
AI Thread Summary
The discussion centers on whether to replace a car battery after it was drained due to a broken alternator. The battery was recharged and tested as okay, but it is noted to be around 60% of its lifespan. Participants suggest that the battery is likely still functional and resilient, advising against replacement unless issues arise. They recommend checking the battery's manufacturing date, indicating that a lifespan of at least five years is expected. Overall, the consensus is to monitor the battery's performance before deciding on a replacement.
Clausius2
Science Advisor
Gold Member
Messages
1,433
Reaction score
7
My alternator broke down recently when riding, and the engine drained completely the energy of the battery. It was almost empty. I got the battery checked and they told me it was ok when recharged. Now I have it recharged, but should I replace it?. It is not brand new, maybe it's at the 60% of its usage.

Thanks.
 
Engineering news on Phys.org
I wouldn't worry about it until it starts causing trouble. It should have lots of life left.
 
No need mate. Automotive batteries are very resilient. Look for the 'first charged' date on a sticker, you should have at least 5 years out of it following that.

If you'd damaged the battery (sometimes faulty alternators overcharge) you'd know about it pretty quickly.
 
Thanks guys.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top