Rabbit vs. Tortoise: A 100-m Race

  • Thread starter Thread starter huong03
  • Start date Start date
  • Tags Tags
    Race
AI Thread Summary
In a 100-meter race between a rabbit and a tortoise, the tortoise moves at a constant speed of 10 cm/s, taking 1000 seconds to finish. The rabbit, after a 16-minute nap, accelerates at 0.15 m/s² and actually completes the race in approximately 996.5 seconds, winning despite the nap. The discussion also clarifies the correct formulas for average velocity and average speed, confirming their definitions. Additionally, if the rabbit had only napped for 15 minutes, a specific acceleration would be required for a tie. Overall, the rabbit's nap and acceleration strategy ultimately led to its victory.
huong03
Messages
1
Reaction score
0
1. A rabbit and a tortoise compete in a 100 meter race. The tortoise moves at a uniform speed of 10 cm/s. The rabbit took a nap for 16 minutes. After the rabbit wake up, he accelerates at a uniform rate of 0.15 m/s^2.
a) Draw a time vs. velocity of the motion of the tortoise and the rabbit? (I'm clueless!)
b) How long does it take for the tortoise to complete the race?
(It takes the tortoise 1000 seconds to win the 100 meter race, right?)
c) How far has the rabbit moved at this time?
d) Who won the race? The tortoise, right? but why?
e) If the rabbit had taken a 15 minutes nap instead, what is his required acceleration for the race to be tie?

2. Is the following formula right?
a) average velocity = (vector)/time

b) average speed = lmagnitudel/ time

Please help, thanks.
 
Last edited:
Physics news on Phys.org
Use formula
s=ut+\frac{1}{2}at^2
s_{tortoise}=0.10t
s_{rabbit}=\left\{\begin{array}{cc}0,&amp;\mbox{if}\ t&lt;\ 960\ s\\<br /> \frac{1}{2}*0.15*(t-960)^2, &amp;\mbox{if}\ t\geq\ 960 s\end{array}\right
v_{tortoise}\frac{ds_{tortoise}}{dt}=0.10
v_{rabbit}=\frac{ds_{rabbit}}{dt}=0.075*(t-960)^2\ for\ t\ \geq\ 960 s
You have got your part (b) correct.
Substitute t=1000 s into the 3rd equation to get 120 m.
Substitute s_{rabbit}=100\ m \ to \ find \ the\ time\ t\ taken\ by\ the \ rabbit\\<br /> \ to\ reach\ 100\ m \ to\ get \ t=996.5 \ s.
Unfortunately, the rabbit won the race.
Part (d)
s_{rabbit}=\left\{\begin{array}{cc}0,&amp;\mbox{if}t&lt;\ 900 s\\ \frac{1}{2}*a*(t-900)^2, &amp; \mbox{if} t\geq\ 900 s\end{array}\right
Substitute t=1000 s, time taken by the tortoise to finish the race = time taken for tie to happen, and s=100 m to get the answer.

Convert anything into SI units first. Initial velocity, u, for the rabbit is 0 because it starts from rest.

Can't help you with the next question, not clear enough...
 

Attachments

  • Explain.gif
    Explain.gif
    1.6 KB · Views: 516
Mistake Correction

v_{rabbit}=\frac{ds_{rabbit}}{dt}=\frac{1}{2}*0.15*2*(t-960) = 0.15t-144\ for\ t\ \geq\ 960 s

The graph is attached.
 

Attachments

  • Explain.gif
    Explain.gif
    1.6 KB · Views: 558
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top