Product Detector vs Envelope Detector

  • Thread starter Thread starter onceinalifetim
  • Start date Start date
  • Tags Tags
    Detector Product
AI Thread Summary
Increasing modulation depth affects both product and envelope detectors differently. Product detectors maintain performance with higher modulation depths, as they can effectively demodulate complex signals. In contrast, envelope detectors may struggle with distortion and reduced fidelity at high modulation depths due to their reliance on the envelope of the signal. Understanding modulation depth involves equations that define it, typically related to the amplitude of the modulating signal compared to the carrier. For accurate analysis, it's essential to explore relevant circuits and theoretical foundations.
onceinalifetim
Messages
38
Reaction score
0
What will happen to product detector and envelope detector when modulation depth is increasing?
 
Last edited by a moderator:
Engineering news on Phys.org
onceinalifetim said:
What will happen to product detector and envelope detector when modulation depth is increasing?

(I deleted the unecessary ? from your post)

What do you think will happen? What equations should you use to answer your question? Please define and show us circuits for the product detector and envelope detector. What is the equation for Modulation Depth?

Please put much more effort into your questions here at the PF.
 
as in the i just want to know the theory of it
 
onceinalifetim said:
as in the i just want to know the theory of it

Please show some effort of your own, or this thread will be deleted.

Search your terms on wikipedia, hyperphysics, google, etc. If you have specific questions about what you find, post the links and your specific questions here.
 
when is the condition for use of product detector??
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Monitor's magnetic field setting off handheld CO detector
Replies
6
Views
2K
Product Detector: Learn When to Use & Benefits
Replies
5
Views
3K
Can I use PID to maximize a detector signal?
Replies
23
Views
2K
Can a basic envelope detector demodulate a DSB-SC signal?
Replies
5
Views
5K
InfraRed Detector Mystery (but not Elementary....)
Replies
9
Views
1K
White stuff of ants colony inside electronics
Replies
10
Views
3K
Can a simple metal detector be modified to detect pipes at a higher voltage?
Replies
10
Views
6K
Why do e.g. smoke detectors need specific battery models?
Replies
20
Views
12K
Troubleshooting: Dash Photon Detector for Car Aircon Recirculation Button
Replies
4
Views
1K
Where Are the Other Detectors for F5 Tally in MCNP?
Replies
4
Views
3K

Hot Threads

Recent Insights

Back
Top