Two main drives in one chain conveyor

  • Thread starter Thread starter ws0619
  • Start date Start date
  • Tags Tags
    Chain Conveyor
AI Thread Summary
Installing two main drives in a chain conveyor can potentially increase speed, but synchronization between the motors is crucial for effective operation. The type of motors, whether AC or DC, and their specifications such as voltage and current ratings are essential for determining compatibility and performance. For AC motors, the ability to increase speed depends on the variable frequency drive's capacity and whether it is already operating at maximum current. Users should assess their current setup to ensure that the drives can handle the desired frequency increase. Proper synchronization and understanding of motor specifications are key to successfully implementing dual drives in a chain conveyor system.
ws0619
Messages
53
Reaction score
0
Hi,
Is it possible to install two main drives in one chain conveyor to boost up the chain conveyor speed?
If possible how to synchronize between the two main drive motors. The motors will control by inverter.
Thanks!
 
Engineering news on Phys.org
Tell us more about your motors, are they AC or DC?
Tell us about the drives you're using. If they're for DC motors, what voltage are they capable of and what voltage are they running at? The same for current, how many amps can it supply and how many amps are being used?

If it's a variable frequency drive with an AC motor, what is preventing you from turning the frequency higher? Are you already operating at maximum current? Is the current frequency all the higher the drive can go?
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Designing a Pallet Chain Conveyor: Calculations and Approaches
Replies
2
Views
1K
Chain Conveyor Speed Calculation
Replies
2
Views
10K
Digital phase converters for running 3-phase motors
Replies
27
Views
294
Simple control circuit for a dc motor to power a conveyor for 5 seconds
Replies
1
Views
5K
Finding Gap Between Two Objects on Moving Conveyor
Replies
13
Views
3K
Electric chain hoist: need help with control circuitry
Replies
25
Views
5K
Calculate Motor HP at Reduced Frequency & Speed
Replies
7
Views
3K
Can I control a two-speed fan motor with a two-way light wall switch?
Replies
17
Views
2K
Electric motor torque control based on speed interaction/instability
Replies
3
Views
2K
Misc. Yarn winder: convert the existing chain drive to more robust mechanism
Replies
6
Views
1K

Hot Threads

Recent Insights

Back
Top