Design & Build a 4-Axis Parallel Robotic Arm

  • Thread starter Thread starter iii
  • Start date Start date
  • Tags Tags
    Parallel
iii
Messages
46
Reaction score
0
I search information about how to design and build a four axis parallel robotic arm like there is in the picture that I added.
 

Attachments

  • parallel four bar.JPG
    parallel four bar.JPG
    8.3 KB · Views: 410
Engineering news on Phys.org
also I search after information about how to design a telescopic arm and / or a forklift - rigging and / or a rotate tower
 

Attachments

  • Rotate Tower.JPG
    Rotate Tower.JPG
    68.9 KB · Views: 391
Last edited:
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »

Similar threads

How to calculate required torque for a robot arm
Replies
2
Views
4K
Can Ancient Metalworking Techniques Enhance Modern Robotic Arm Design?
Replies
6
Views
1K
Automotive Steering Force, Determining the Lever Arm
Replies
9
Views
1K
How to begin in studying Mechanics and ME?
Replies
16
Views
1K
Torque required to move robot arm (special linkage)
Replies
3
Views
2K
Mechanisms to secure items in a box
Replies
1
Views
1K
Supporting structures used in machines/production lines
Replies
12
Views
2K
Can Springs Effectively Reduce the Torque Required for a Robotic Arm?
Replies
16
Views
2K
Crazy idea for battle bot. Can it work?
Replies
3
Views
1K
Cardboard Robotics: Building a Desktop Robotic Arm
Replies
9
Views
3K

Hot Threads

Recent Insights

Back
Top