How Can You Convert a Cellphone into a Tablet?

  • Thread starter Thread starter mishaparem
  • Start date Start date
AI Thread Summary
Converting an old cellphone into a tablet involves significant challenges, particularly in finding a compatible larger display and dealing with the limitations of the phone's existing hardware. The original pixel density would decrease with a larger screen, leading to poorer image quality, as the pixel count is fixed by the device's video drivers. Developing custom software could enhance functionality, but older phones typically lack the processing power to support advanced applications. Alternative uses for old Android phones include repurposing them as security cameras or other useful devices, leveraging the open-source nature of the Android OS. Overall, while the project is intriguing, practical limitations may hinder successful conversion.
mishaparem
Messages
5
Reaction score
0
Hello everyone, I'm sort of bummed that no one seems to be doing anything with their old cell phones, so I thought swapping a 4in LCD screen on a cellphone with a 10-12in one off the internet would be a unique project that I could document for other interested people. The problem is that I lack the necessary EE knowledge and experience to do it on my own. I was hoping an EE on here would find such a project interesting, and sort of guide me along the project. I figure my old Samsung Droid Charge (i510) would make a good donor cellphone.
 
Engineering news on Phys.org
Swapping out for a bigger display (Assuming you could find a compatible one) would only give you bigger pixels. Kind of like digital zoom on a camera. The bigger it gets, the worse it looks. You couldn't increase the number of pixels because that is "baked in" to the video drivers.

You would need to find a display with a compatible interface (same connector pins, etc).

Unless you are willing to develop custom software for the phone (possible for android). But even that would be a waste since the older phones have less powerful processors.

There are projects to turn old android phones into security cameras, etc.
http://www.howtogeek.com/139373/how-to-turn-an-old-android-phone-into-a-networked-security-camera/

And lots of other ideas.

http://www.computerworld.com/s/arti...old_Android_device?taxonomyId=75&pageNumber=1

Android phones can be usefull computers since the the OS is open source and they are easily messed with. I can't say how easily since I have not actually programmed one yet.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top