Aerospace Engineering Internships in SE MN & WI

  • Thread starter Thread starter edosqclbe699
  • Start date Start date
  • Tags Tags
    Internship
AI Thread Summary
Aerospace engineering students in southeast Minnesota and eastern Wisconsin are struggling to find internship opportunities. Networking through organizations like ASME and attending local events can enhance chances of finding relevant positions. Some users suggest considering internships at NASA and exploring research opportunities nationwide, despite many deadlines having passed. It is important to remain proactive in the search for internships, as any experience can be beneficial. Overall, persistence and networking are key strategies for securing internships in the aerospace field.
edosqclbe699
Messages
4
Reaction score
0
I am studying to be an Aerospace engineer. I am approaching my junior year and am planning to transfer to the U of MN and I am interested in finding an internship or something else in southeast Minnesota or eastern Wisconsin. I seem to have trouble finding any opportunities in my field in my area. Can anyone give me any ideas to find something. I have spent hours searching and have found nothing. Would any position I can find be beneficial or should I just not worry about it yet.
 
Engineering news on Phys.org
Have you joined ASME? Going to events in your area (which they will inform you about) can help. Remember, it is all about networking!
 
It depends on how adamant you are about doing an internship in aerodynamics. Several of my friends did an internship at NASA so you should probably look at that if you haven't already done so. If you are looking for research experience in general, send me an e-mail to kotor2@gmail.com and I can send you a list of 100-150 undergraduate research opportunities nationwide including national laboratories. Most of the deadlines have expired but you could always apply or hang onto it for next year. Chances are good that there are several aero positions in it.
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
Back
Top