Angular Physics: Calculate Arrow Height with Velocity & Gravity

  • Thread starter Thread starter IBdoomed
  • Start date Start date
  • Tags Tags
    Angular Physics
AI Thread Summary
An arrow is launched at a 33° angle with an initial velocity of 55 m/s, and the acceleration due to gravity is 9.8 m/s². To find the maximum height, the vertical component of the velocity is calculated using the sine function, resulting in 29.96 m/s. Applying the kinematic equation v² = u² + 2as, where the final vertical velocity (v) is 0 at the peak, the correct height is determined to be 91.6 meters after correcting an earlier calculation error. The discussion emphasizes the importance of focusing on vertical motion and double-checking calculations for accuracy.
IBdoomed
Messages
16
Reaction score
0
We just started this unit and I'm lost...

An arrow is shot at 33◦ angle with the horizontal. It has a velocity of 55 m/s.
The acceleration of gravity is 9.8 ms^-2
How high will the arrow go?
Answer in units of m

I know that S= 1/2 at^2+ut
and all the rules of the basic trig functions (Sin, cos, tan) I just don't see how to incorporate it all into this question...
 
Physics news on Phys.org
Draw your diagram showing the arrow and its initial launch velocity. Since you are asked how high it can go this means you are only interested in the vertical motion so you can deal only with velocity, acceleration and displacement in the y direction. See if you can go from there. There are two pieces of implied information in this problem. First, gravity is acting on the arrow, second, what happens to the velocity in the y direction when the arrow reaches the highest point?

(There is an alternative solution using energy if you happen to think of it but it's a bit tricky)
 
OH i think i got it now...
okay so i used 55*sin(33) to find the y component of the velocity. then used the equation v^2= u^2+2as
v= 0
u= 55 m/s
a= -9.8 m/s^2
and using this got a height of 154.34 meters.

Can you tell me if this is correct?
 
scratch that. i caught my own mistake. i meant to plug in 29.96 m/s for u. and the answer i get is 91.6 meteres!
 
you're doing it right - just double check your math. It's probably right - I don't have a calculator and am too brain dead to estimate right now.
 
thanks! i got it right :D
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top