Ansoft Maxwell 3d Closely coupled inductor

[JONDUROST]

Hello! I am having an issue with getting any graphs on inductance or induced voltage.

In the attached circuit:
What I have is a 28Vac source w/ 400hz and 2 coils (R=18.6ohm each) that are connected with a common.

In the model:

I have a core in the center that will be able to move up changing the induced voltage and inductance when taken from the input of coil 1 and common or input of coil 2 and common. I know from experience (and hand calculations), that the coil will have 100mH from top to bottom when taken from input of coil 2 and output of coil 1 and with 50mH on each when the core is centered (obviously).

Any help will be appreciated,
(wrote this fast, sorry if it's hard to understand)

Thanks

 

[JONDUROST]

Here is the circuit

My ansoft file was too big to import here.. trying to get it up

 

[JONDUROST]

http://www.freefilehosting.net/simulation

 

[JONDUROST]

Guess this wasn't a fun topic for anyone

 

[jim hardy]

neither of your links will open

 

[JONDUROST]

Really? They work when I tried them

 

[jim hardy]

i get an advertisement at filehosting
and no recognition of a file by the name in your other link

windows 7, ie9

maybe somebody else can help