Any good HEAT TRANSFER books out there?

AI Thread Summary
For graduate-level heat transfer studies, several specialized books are recommended. "Heat Conduction" by Necati Ozisik focuses on conduction, while "Convective Heat and Mass Transfer" by Kays covers convection in detail. For radiation, "Radiative Heat Transfer" is a key resource. Additionally, "Heat Transfer" by A. E. Mills serves as a bridge between undergraduate and graduate material. These texts provide a comprehensive foundation for advanced heat transfer concepts.
Jennifer_88
Messages
17
Reaction score
0
any good HEAT TRANSFER books out there??

Hi,

I am looking for a heat transfer book for Graduate level. i am actually familiar with good undergraduate books like fundamental of heat transfer. please tell me a little bit about whatever book you are recommending

thanks in advance
 
Engineering news on Phys.org


At the graduate levels, conduction, convection, and radiation are usually broken up into separate books. Here are some that I would recommend for starters:

Conduction: Heat Conduction, Necati Ozisik
Convection: Convective Heat and Mass Transfer, by Kays
Radiation: Radiative Heat Transfer, Modest
 


"Heat Transfer" by A. E. Mills is a good graduate-ish level book that would generally be a bridge between the undergraduate class and the graduate classes that are broken into cinduction, convection and radiation.
 


thank you guys.
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top