Battery-Powered LED: Feasible Solution for 3x3x3 Box?

  • Thread starter Thread starter johnflynn
  • Start date Start date
  • Tags Tags
    Battery Led
AI Thread Summary
For a 3x3x3 foot box requiring battery-powered LED lighting, efficiency and brightness are key considerations. Standard batteries are recommended due to the budget constraints, and the desired light output should be specified to determine the appropriate power source. Modifying existing LED fixtures for battery use is feasible, but purchasing ready-made battery-powered LED night-lights or strips may be more convenient. Options like a Black and Decker Auto Jump starter can provide a rechargeable battery solution, though capacity may limit usage time. Overall, careful selection of LEDs and power sources will ensure adequate lighting for the intended duration.
johnflynn
Messages
1
Reaction score
0
I have a 3x3x3 foot box that I want to light up in a place that does not have access to electricity. The box will ideally be as well lit as a regular room in the evening with red, green or blue light. We anticipate using the box 4 hours a day for 7 days.

Given these parameters I am trying to find the most efficient light and power source for the project. I cannot afford a generator which might limit the project to standard batteries as a power supply. If this is true, what LEDs might be appropriate/compatible with it? Is it feasible to modify LEDs that fit into standard lightbulb sockets or plug into wall sockets for use with a battery power supply?
 
Engineering news on Phys.org
Why not just buy a LED flashlight or two?
 
Welcome to PF;
You also need to specify how bright you want the box to be - i.e. what power are you hoping to put through the light-source. Then you can select batteries based on price and how much power they can supply.

i.e. you want to run a led lamp designed to use 10W at 12V, then you'd hook it to a car battery and it will draw 10W each hour until the battery voltage starts to drop. You need to know how the battery performs at the load too ...
 
If you don't want to build your own, you could just buy battery-powered, wall mount LED night-lights.

http://www.destinationlighting.com/storeitem.jhtml?iid=337903&utm_source=GoogleShopping&utm_medium=CSE&utm_campaign=AccentLamps&gclid=CN3M_b2N-rgCFap7QgodJBwAaA

Buy a few of these and place them strategically along the walls/ceiling. Should do the trick, if you are willing to replace batteries every so often. They sell these at ACE hardware I'm fairly sure...
 
You might consider 12V led lighting strips from Amazon. And a Black and decker Auto Jump starter which gives you a chargable battery in a reasonable case. (but they are only like, say, 9 AmpereHours so you may not get the hours you want)
 
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
Back
Top