Box being pushed up an inclined plane

AI Thread Summary
A 250N horizontal force is applied to a 29kg box moving up a 27-degree inclined plane at constant speed. The gravitational force acting on the box is calculated to be 284.2N, and the normal force is determined to be perpendicular to the inclined surface. The normal force counteracts the component of the weight acting perpendicular to the plane, leading to confusion in resolving vectors. The correct answer for the normal force and coefficient of kinetic friction is option e, which is 370N and 0.26, respectively. Proper vector resolution is essential for solving the problem accurately.
bajangal1
Messages
5
Reaction score
0

Homework Statement



A 250N force is directed horizontally to push a 29kg box up a plane that is inclined at 27 degrees to the horizontal. the box moves up the plane at a constant speed. Determine the magnitude of the normal force, and the coefficient of kinetic friction.
g=9.8m/s^2
a(y) = 0m/s

Homework Equations


F=mg to find the force that is pulling down on it
Fk= \mu k Fn


The Attempt at a Solution



I understand that the forces need to be resolved into the same direction, but I'm not sure what direction the normal force would be pointing in. The force of gravity i got was 284.2N. I can't figure out the kinetic friction until i figure out the normal force.
 
Physics news on Phys.org
The normal force will be at 90 degrees to the inclined surface, and equal and opposite to the component of the weight of the box acting perpendicularly through the plane.
 
maybe I'm resolving my vectors wrong. when i resolve the vector for weight, the part that should be equal and opposite to Fn I'm getting 129.02N which is not possible as it is multiple choice and that's not even one of the answers
 
What are the options you are given?
 
a) 330N 0.31
b) 310N 0.33
c) 250N 0.27
d) 290N 0.30
e) 370N 0.26

The answer is e
 
To find the components of the weight, draw an angle formed by the vector of weight and a line perpendicular to and under the surface. This angle is equal to the angle of inclination of the plane.
Make the x-axis parallel to the surface, so the y-axis would be perpendicular to the surface and parallel to the normal force.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top