Brain Buster: Solving the Minimum Angular Velocity for a Thrilling Carnival Ride

  • Thread starter Thread starter Dragoon
  • Start date Start date
  • Tags Tags
    Brain
AI Thread Summary
The discussion centers on calculating the minimum angular velocity required for a rotating cylinder ride at a carnival, where the floor is removed and riders cling to the wall due to centrifugal force. The correct formula for angular velocity is derived as ω = √(g/(μr)), where g is the acceleration due to gravity, μ is the coefficient of static friction, and r is the radius of the cylinder. Substituting the values (g = 9.81 m/s², μ = 0.5, r = 5.6 m) yields an angular velocity of approximately 2 s⁻¹. However, a discrepancy arises regarding significant figures, leading to an accepted answer of 1.872 s⁻¹. The conversation highlights the importance of clarity in applying significant figure rules in calculations.
Dragoon
Messages
17
Reaction score
0
One of the amusements at many carnivals is a rotating cylinder. The customers step inside and stand with their backs to the wall. The cylinder spins very rapidly, and at some angular velocity the floor is pulled away. The thrill-seekers now hang like flies on the wall. If the radius of the cylinder is 5.6 m, and the coefficient of static friction between the people and the wall is 0.5, what is the minimum angular velocity, w, at which the floor can be withdrawn?
 
Physics news on Phys.org
i used the equation W=√g/µr but it was incorrect
 
This problem is pretty straightforward if you draw an FBD from the rotating reference frame. The normal force exerted by the cylinder is going to provide the centripetal acceleration.

so
a_c=r\omega^2
F_{normal}=ma_c
F_{friction}=\mu m a_c
F_g=mg
|F_{friction}|=|F_g
\mu m a_c = m g
\mu r \omega^2 = g
\omega=\sqrt{\frac{g}{\mu r}}

Looks like you were right.
Now plugging in numbers:
\omega=\sqrt{\frac{9.81}{0.5 \times 5.6}} \approx 2 s^{-1}
(0.5 has only one sig fig).
 
thanks for the help i used that equation but for some reason the computer didnt like it the course tells me to use the significant figure rule then doesn't use it later so the accepted answer was 1.872s-1 but thanks for the help again i really appreciate it.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top