Brewer needs lesson in thermodynamics.

  • Thread starter Thread starter Birdboybrewing
  • Start date Start date
  • Tags Tags
    Thermodynamics
AI Thread Summary
A brewery startup is seeking guidance on designing an efficient brew kettle, specifically regarding the layout of the firebox for optimal heating. The kettle dimensions are 45" wide and 48" tall, with plans to use a 400k BTU forced air burner. The discussion highlights the need for baffles to improve gas flow between the burner and exhaust for better heating efficiency. A sketch of the kettle is included for reference, but the original poster is looking for specific advice on gas flow patterns. The forum aims to gather insights to enhance the brewing process effectively.
Birdboybrewing
Messages
2
Reaction score
0
I'm starting a brewery and need some help designing a brew kettle. I haven't found much in the brewing community about how a brew kettles firebox is laid out. I've got a tank that is 45" wide and 48" tall and I'm planning on heating it with a 400k btu forced air burner, basically like a small jet engine. But in order to heat efficiently I'm thinking it needs some baffles between where the gas is blown in and the exhaust. I'll include a sketch of the kettle, but i need help laying out the best possible gas flow pattern for efficiently heating the thing, please help me. Here's a good forum post on it, but doesn't help me much. http://discussions.probrewer.com/showthread.php?18370-Brew-Kettle
 

Attachments

  • image.jpg
    image.jpg
    38.4 KB · Views: 475
Engineering news on Phys.org
The fire box is the area under the kettle sorry it's not labeled very well in the sketch.
 

Thread 'A practical way to vaporize fuel for high MPG?'

Here's a video by “driving 4 answers” who seems to me to be well versed on the details of Internal Combustion engines. The video does cover something that's a bit shrouded in 'conspiracy theory', and he touches on that, but of course for phys.org, I'm only interested in the actual science involved. He analyzes the claim of achieving 100 mpg with a 427 cubic inch V8 1970 Ford Galaxy in 1977. Only the fuel supply system was modified. I was surprised that he feels the claim could have been...
View full post »
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Similar threads

Thermodynamics: The Jet Engine
Replies
3
Views
3K
Help understanding thermodynamics/BTUs
Replies
8
Views
3K
Finding work done, heat in, and heat out over a reversible thermodynamic cycle
Replies
3
Views
5K
Solving Steam Entering Turbine Problem
Replies
15
Views
5K
Otto Cycle Engine Homework: Total Work & Efficiency Calculation
Replies
1
Views
8K
Help with thermodynamic potentials
Replies
10
Views
2K
How Do Thermodynamic Potentials Apply in a Two-Cylinder System with a Heat Pump?
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top