Build Coil-Gun w/ Lithium Car Batteries: Rapid Fire & High Velocity?

  • Thread starter Thread starter supak111
  • Start date Start date
AI Thread Summary
The discussion revolves around building a coil-gun powered by three 12v lithium car batteries in series, focusing on rapid-fire capability without the use of capacitors. The original poster questions whether using only batteries could achieve high projectile speeds with multiple stages. However, the forum moderators emphasize that discussions on constructing such devices are prohibited due to safety concerns and the potential dangers associated with high current applications. They clarify that while coilguns are legal, the risks involved in building them warrant caution and discourage any detailed guidance on the project. Ultimately, the thread was closed due to the nature of the topic being deemed unsafe.
supak111
Messages
47
Reaction score
1
I'm building a coil-gun. I want to use 3 12v lithium car batteries in series to power the gun. Lithium car batteries have enough energy, are light so gun would be smaller & lighter without capacitors, but most importantly I need the gun to be able to rapid fire so I don't have much time for cap charging.

Lets say that I could build an super long barrel with say a 1000 coils/stages on the gun. And each coil is fired by opti switch at the right time, in this hypothetical gun would it be better to power the gun with just batteries mentioned above or still use caps on each stage of the gun?
(again the gun needs to rapid fire so not much time for charging and don't have much room for huge power supply to do so)

If I just use the batteries to power the coilgun, and I have many stages in the gun can I still theoretically get the projectile to any speed by adding more and more stages?

Thanks everyone
 
Engineering news on Phys.org
supak111, Welcome to Physics Forums! You have come to the wrong place to get help in building a coilgun. If you click on "rules" at the top of the page, then scroll down that page you will find this:

"PROHIBITED: Illegal & Dangerous Activities: Explicit "how to" discussions of illegal and/or dangerous activities, or posts advocating such activities, are prohibited; such as: how to make explosives, manufacture crack, steal software, hack into the CIA,..."

Sorry, but you cannot expect any member here to help. Now, if you ever have a doubt or question about anything non-lethal/not a weapon, then do post it here. Members here are always ready to assist everyone who wants to learn and shows herself to be a true searcher.

Cheers,
Bobbywhy
 
But coilguns and railguns are 100% LEGAL in all 50 US states. Actually by federal definition of a "firearm" coilguns and railguns are not even considered guns which is what makes them so appealing to build and use.

I'm def not trying to break any forum rules
 
For coil guns to be able to 'shoot' or 'launch' anything, you need a HIGH HIGH current, and that's dangerous. We don't want anyone to die because someone gave you not safety first advice from this forum.
Car batteries: dangerous

If you don't understand why your project is incredibly impractical and not implementable, then you probably shouldn't be able allowed to operate a toaster oven.
 
Dangerous discussions are not allowed at the PF. Thread is closed.
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top