Calculate Power & Torque for Electric Machine

  • Thread starter Thread starter bogdan1601
  • Start date Start date
  • Tags Tags
    Power Torque
AI Thread Summary
To calculate the necessary power and torque for the electric machine, the starting torque must be determined based on the load of 130 kg and the required acceleration of 12 m/s². The torque to maintain a constant speed of 6 m/s can be calculated using the wheel's diameter of 20 cm. Additionally, the stopping distance and time can be derived from the deceleration needed to come to a halt. The motor's speed of 3000 rpm will also factor into the calculations for engine power. Accurate calculations will provide the necessary specifications for the project.
bogdan1601
Messages
3
Reaction score
0
Hello!


I’m new on this forum and I would like to ask you for help.

I have a project to make about an electric machine, that needs to reach the velocity of 6 m/s, with an acceleration of 12 m/s^2 and a load of 130 kilos.


It is being asked to calculate the starting torque ,the torque to maintain a constant speed of 6 m/s, the distance and time to stop and the engine power, knowing that the motor is 3000 rpm and the wheel has a diameters of 20 cm.

Thanks a lot!
 
Physics news on Phys.org
OK, so what is it that you need help with?
 
starting torque ,the torque to maintain a constant speed of 6 m/s, the distance and time to stop and the engine power
 
Have a go at some solutions yourself, and let us know where you are getting stuck.
 
I want to know what is the necessary power to move this mashine and the minimum torque to move it.
 

Similar threads

Minimum motor power for a mechanical horizontal sieving machine
Replies
2
Views
2K
Calculating Motor Load Capacity for a 4kg Vehicle
Replies
2
Views
2K
Torque in Wind Turbines: Calculating Power Output
Replies
1
Views
4K
Engineering Calculating Power Losses in an AC Induction Motor
Replies
7
Views
3K
Engineering Torque calculation of a motor with permanent magnets
Replies
15
Views
4K
Do these Resistance torque values for my setup make sense?
Replies
3
Views
1K
Motor calculation for a rotating platform
Replies
7
Views
4K
Engineering Torque applied on a vise screw (problem includes friction)
Replies
9
Views
3K
B How to Calculate Power and Torque for a 15kg Load at 15 RPM?
Replies
7
Views
2K
Engineering Calculating Efficiency and Speed of a DC Motor at Half-Load Torque
Replies
13
Views
3K

Hot Threads

Recent Insights

Back
Top