Calculate the spring constant of the bungee cord

AI Thread Summary
The spring constant of the bungee cord is calculated to be 36.8 N/m, using the formula k = (mg)/x, where m is the mass of the jumper and x is the displacement. The displacement is determined from the jumper's final position, which is 20.0 m below the bridge after oscillating multiple times. The unstretched length of the bungee cord is found to be 5.43 m, calculated using the formula L = (m + k)/k. These calculations are essential for ensuring the safety and effectiveness of the bungee jumping experience. Understanding these values is crucial for proper bungee cord design and usage.
physicsss
Messages
319
Reaction score
0
A bungee jumper with mass 200.0 kg jumps from a high bridge. After reaching his lowest point, he oscillates up and down, hitting a low point eight more times in 30 s. He finally comes to rest 20.0 m below the level of the bridge. Calculate the spring constant of the bungee cord and the unstretched length of the bungee cord.

How do I approach this problem?
 
Physics news on Phys.org
Well, you know that T = 30/8 = 3.75
And T=2\cdot\pi\cdot\sqrt{\frac{m}{k}} => k = 561.47[N/m]
You also know that 20m under the bridge a=0
\Sigma \vec{F} = 0
mg=k\Delta L
Now you just need to get \Delta L.

HTH
 
Last edited:


To calculate the spring constant of the bungee cord, we can use the formula k = (mg)/x, where k is the spring constant, m is the mass of the bungee jumper, g is the acceleration due to gravity (9.8 m/s^2), and x is the displacement of the bungee cord.

First, we need to calculate the displacement of the bungee cord. Since the bungee jumper reaches a low point eight more times in 30 s, we can divide 30 s by 9 to get the time for one oscillation, which is approximately 3.3 s. This means that the bungee cord oscillates 8 times in 3.3 s, so the total number of oscillations is 8 x 9 = 72.

Next, we can use the equation d = (1/2)at^2 to calculate the displacement of the bungee cord. We know that the final displacement is 20.0 m below the bridge, and the initial displacement is 0 since the bungee cord is unstretched at the beginning. So, we have:

20.0 m = (1/2)(9.8 m/s^2)(3.3 s)^2
20.0 m = 54.3 m

Now, we can substitute the values into the formula for spring constant:

k = (mg)/x
k = (200.0 kg)(9.8 m/s^2)/54.3 m
k = 36.8 N/m

Therefore, the spring constant of the bungee cord is 36.8 N/m.

To find the unstretched length of the bungee cord, we can use the formula L = (m + k)/k, where L is the unstretched length, m is the mass of the bungee jumper, and k is the spring constant.

L = (200.0 kg + 36.8 N/m)/(36.8 N/m)
L = 200.0 kg/36.8 N/m + 1
L = 5.43 m

So, the unstretched length of the bungee cord is 5.43 m.

In summary, the spring constant of the bungee cord is 36.8 N/m and the unstretched length is 5.43 m. These calculations can help ensure the safety and
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top