Calculating Efficiency of a Solar Cell Indirectly

AI Thread Summary
The discussion focuses on measuring the efficiency of a solar cell indirectly, using the equation η = P/E*A, where P is power output, E is irradiance, and A is surface area. The original poster considers using a pyranometer for irradiance and a digital multimeter for power but acknowledges these methods are not truly indirect. Participants suggest that more information about the project requirements could help clarify the approach. They emphasize the need for brainstorming and understanding the solar cell's function and efficiency conceptually. The conversation encourages exploring alternative methods and hints rather than providing direct solutions.
aaron@pitt
Messages
4
Reaction score
0
Not sure if this is the right section for this, I apologize in advance.

I have a project to do and my goal is to measure the efficiency of a solar cell INDIRECTLY. I am not sure how to do that.

The equation for the efficiency of a solar cell is

η = P/E*A.

Where P is the cells power output (W), E is the irradiance (W/m^2) and A is the surface area of the cell (m^2).

The only thing I can think of is using a pyranometer to measure irradiance, and digital multimeter to measure power, but these aren't really indirect.

Can someone please help?

Thanks.
 
Physics news on Phys.org
aaron@pitt said:
Not sure if this is the right section for this, I apologize in advance.

I have a project to do and my goal is to measure the efficiency of a solar cell INDIRECTLY. I am not sure how to do that.

The equation for the efficiency of a solar cell is

η = P/E*A.

Where P is the cells power output (W), E is the irradiance (W/m^2) and A is the surface area of the cell (m^2).

The only thing I can think of is using a pyranometer to measure irradiance, and digital multimeter to measure power, but these aren't really indirect.

Can someone please help?

Thanks.

Interesting question. I have an idea of a way to do it, but is there any more definition to the problem? Like, do they say any more about direct versus indirect measurements?
 
berkeman said:
Interesting question. I have an idea of a way to do it, but is there any more definition to the problem? Like, do they say any more about direct versus indirect measurements?

Not really. All it says is that I need three sensors to indirectly measure it.
 
aaron@pitt said:
Not really. All it says is that I need three sensors to indirectly measure it.

Yeah, that agrees with my idea. We are not allowed to give you solutions here on the PF, but we can provide hints if you show some effort. What other ideas do you have so far?
 
berkeman said:
Yeah, that agrees with my idea. We are not allowed to give you solutions here on the PF, but we can provide hints if you show some effort. What other ideas do you have so far?

That is all I have so far.
 
aaron@pitt said:
That is all I have so far.

Have you been doing any thinking or brainstorming about it? What does a solar cell do? What is its function, and how does it do it? What does efficiency mean in a high-level way for a solar cell power converter?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top