Calculating Force Components and Impact Force for Flight Recorder Testing

  • Thread starter Thread starter hyen84
  • Start date Start date
AI Thread Summary
To calculate the components of a force vector with a magnitude of 671 N at an angle of 65.8° north of east, trigonometric functions sine and cosine are used to find the north-south and east-west components. For the impact force on a flight recorder, a 45-kg box thrown at 210 m/s and stopped in 5.7 ms requires applying impulse and momentum principles to determine the average net force. The formula used is \overline{F} = m\frac{\Delta v}{\Delta t}, where the change in velocity and time of collision are critical. Users are encouraged to share their calculations for verification if they encounter discrepancies in their results. Accurate application of these formulas is essential for proper analysis in both scenarios.
hyen84
Messages
16
Reaction score
0
Need help With This...

i don't know which formulas to use to find the answer..please help...thanks in advance...

1.A force vector has a magnitude of 671 N and a direction of 65.8° north of east. Determine the magnitude of the components of the force that (a) point along the north-south line and (b) along the east-west line.

2.Airplane flight recorders must be able to survive catastrophic crashes. Therefore, they are typically encased in crash-resistant steel or titanium boxes that are subjected to rigorous testing. One of the tests is an impact shock test, in which the box must survive being thrown at high speeds against a barrier. A 45-kg box is thrown at a speed of 210 m/s and is brought to a halt in a collision that lasts for a time of 5.7 ms. What is the magnitude of the average net force that acts on the box during the collision?
 
Physics news on Phys.org
1. The force vector and its two axile components form a right triangle with an angle of 65.8°. Use the trigonometric functions sine and cosine to find the magnitudes of the axile components.

2. Using impluse and momentum:
\overline{F}\Delta t = m\Delta v
\overline{F} = m\frac{\Delta v}{\Delta t}
If you don't know about these, you can get to the same answer from Newton's law:
\overline{F} = ma = m\frac{\Delta v}{\Delta t}
 
Last edited:
hey thanks for the help...i really appreciate it..but for some reason i used what you said and i got the answer wrong...i don't know where i did wrong..can someone double check for me..thanksssssssssssss
 
Which question? And can you please show me what you did, so I can correct your methods if need be.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top