Calculating Inductance in an RL Circuit

AI Thread Summary
To calculate the inductance in the RL circuit, the relevant equations include the time constant τ = L/R and the current equation I(t) = (EMF/R)(1 - e^(-tR/L)). Given a 9.0 V battery, a 5.5 ohm resistor, and a current increase from 0 to 0.30 A in 0.17 seconds, the inductance can be determined by substituting known values into the equations. The attempt to find L yielded an incorrect value of 5.1, indicating a need for careful application of the equations. The discussion emphasizes the importance of correctly solving for the unknown inductance to progress to the next part of the problem.
n.hirsch1
Messages
13
Reaction score
0

Homework Statement



An RL circuit has a 9.0 V battery and a 5.5 ohm resistor. When the switch is closed, the current in the circuit is observed to increase from 0 to 0.30 A in 0.17 s.
A) What is the inductance?
B) How long after the switch is closed does the current have the value 0.47 A?


Homework Equations


τ = L/R
EMF = L*I / t
I = EMF / R *(1-e^-tR/L)

The Attempt at a Solution


I don't know how to find a time constant, my text doesn't explain it, which makes me think that this question may not even use this equation. I can't get to part B without an answer to part A. By using the second equation I got L = 5.1, but that isn't correct.
 
Physics news on Phys.org
n.hirsch1 said:

Homework Statement



An RL circuit has a 9.0 V battery and a 5.5 ohm resistor. When the switch is closed, the current in the circuit is observed to increase from 0 to 0.30 A in 0.17 s.
A) What is the inductance?
B) How long after the switch is closed does the current have the value 0.47 A?


Homework Equations


τ = L/R
EMF = L*I / t
I = EMF / R *(1-e^-tR/L)

The Attempt at a Solution


I don't know how to find a time constant, my text doesn't explain it, which makes me think that this question may not even use this equation. I can't get to part B without an answer to part A. By using the second equation I got L = 5.1, but that isn't correct.

are you sure you don't know how?
 
No, I don't. Its asking for inductance, I have resistance, I have no idea how to get the time constant.
 
n.hirsch1 said:
No, I don't. Its asking for inductance, I have resistance, I have no idea how to get the time constant.

I(t) = \frac{v}{R} e^{\frac{-tR}{L}}
You know the value of current = 300mA at t = .17. v = 9 and r = 5.5. This leaves 1 unknown. Solve for it.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top