Calculating Velocity After Car-Truck Collision

  • Thread starter Thread starter IDKPhysics101
  • Start date Start date
  • Tags Tags
    Collision Velocity
AI Thread Summary
To calculate the original velocity of the car before the collision, the conservation of momentum principle must be applied in both horizontal and vertical directions. After the collision, the combined mass of the car and truck moves at an angle of 63.1 degrees with a shared velocity. The horizontal and vertical momentum components should be resolved to set up equations based on the initial and final momentum. By solving these equations, the original velocity of the car can be determined. This approach effectively utilizes the conservation of momentum to find the unknown velocity.
IDKPhysics101
Messages
31
Reaction score
0
A 568.6 kg car travels with a velocity the positive horizontal direction. A 997.8 kg truck travels at 11.5 m/s in the positive vertical direction. The two cars collide and both travel at an angle of 63.1 degrees above the positive x-axis at the same velocity. What is the original velocity (in m/s) of the car before it hits the truck?

If some one can give me a hint to start it that would be awesome!
 
Physics news on Phys.org


Resolve the final momentum of the car and truck into horizontal and vertical components and then use conservation of momentum for both the vertical direction and the horizontal direction.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

Help with question on motion: Avoiding a rear-end collision
Replies
6
Views
3K
Determining position of an object after inelastic collision
Replies
1
Views
2K
Ambiguous question on momentum and how it works...
Replies
13
Views
1K
Estimate the initial velocity of the cars after the collision
Replies
29
Views
3K
When Will the Car Overtake the Truck?
Replies
2
Views
1K
Car Crash Analysis: Analyzing Friction & Speed
Replies
9
Views
4K
Lifting height of a box in a truck going over a speed bump
Replies
12
Views
1K
Newton's Second Law: Understanding Forces, Masses, and Acceleration
Replies
3
Views
2K
Common velocity after truck starts pulling a car
Replies
2
Views
1K
Distance traveled during a head on collision
Replies
36
Views
6K

Hot Threads

Recent Insights

Back
Top