Calculating Work Needed to Stop a 1100 kg Car | KE=1/2mv² | 118km/h Speed

  • Thread starter Thread starter lim
  • Start date Start date
  • Tags Tags
    Car Work
AI Thread Summary
To calculate the work needed to stop a 1100 kg car traveling at 118 km/h, the kinetic energy (KE) formula is applied: KE = 1/2 mv². The speed conversion from km/h to m/s yields approximately 32.78 m/s. Plugging this value into the KE formula results in a kinetic energy of about 118,181,537.9 joules. The work done to stop the car is equal to this kinetic energy, which means approximately -5.91 x 10^7 joules of work is required. Accurate unit conversions and calculations are crucial for determining the correct amount of work needed.
lim
Messages
19
Reaction score
0

Homework Statement



How much work must be done to stop a 1100 kg car traveling at 118 km/hr?

Homework Equations


Ei + W= Ef
KE= 1/2mv^2

The Attempt at a Solution



KE= 1/2mv^2

118kmx1000m/360s= 327.78

327.78^2= 107437.76

107437.76x1100= 118181537.9

118181537.9/2 = -5.91x10^7

thanks for any help
 
Physics news on Phys.org
lim said:
118kmx1000m/360s= 327.78
Recheck that conversion: How many seconds in an hour?
 
do KE = 1/2 (1100 kg)(118*(1000/3600))^2
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

What Is the Car's Speed After Exiting the Mud Patch?
Replies
3
Views
2K
How Do Crash Dummies Help Us Understand Car Safety Physics?
Replies
8
Views
4K
What is the maximum attainable speed for the car?
Replies
4
Views
2K
What is the work done on cart by the string?
Replies
1
Views
2K
Stopping distance of a car rolling down a hill
Replies
4
Views
2K
What Is the Average Power of Bullets Bouncing Off Superman?
Replies
26
Views
3K
Calculating Initial Velocity of Car 1 in a Collision | Homework Problem
Replies
8
Views
3K
What is the work done by braking force on a decelerating car?
Replies
11
Views
2K
Calculating Pump Power and Fountain Height from Water Ejection Speed
Replies
20
Views
4K
Problem involving energy/motion
Replies
19
Views
2K

Hot Threads

Recent Insights

Back
Top