Can 225vac from Solar flow back to grid?

  • Thread starter Thread starter maximiliano
  • Start date Start date
  • Tags Tags
    Flow Grid Solar
AI Thread Summary
In the USA, a DIY solar array producing 225VAC can potentially backfeed into the grid, but this depends on the system's wiring and the transformer at the pole, which can operate in both directions. The 220VAC line supplying a home may also serve multiple residences, allowing excess energy to flow to neighbors if properly configured. However, safety regulations require appropriate equipment to prevent hazards, such as automatic shutoff systems that prevent backfeeding during power outages. Unauthorized setups can lead to significant legal and safety issues, emphasizing the importance of adhering to strict installation codes. Proper installation and safety measures are crucial for any solar energy system connected to the grid.
maximiliano
Messages
43
Reaction score
0
Note, this is in the USA, where the street lines are 4,800vac (I think?)...and the lines from the pole are 220VAC to the panel.

For example, let's say I'm making 225vac from a DIY solar array (connected to my main panel), and the amount of energy I'm currently producing is more than what I'm consuming at my house (and there is no net metering setup...just solar panels with inverters pushing 225VAC connected to my panel). Assuming (since I'm in the USA) that the power coming from the street to my panel is 220VAC, and the power at the line is much higher (4,800 right?)...can my excess (unused) current get to my neighbor's house?

I always thought it could not, because the line at the street is MUCH higher voltage. However, someone said it can, because the transformer at the pole would simply take the 225VAC and step it up so it could flow back into the grid, and be used by someone else in the neighborhood. Is that right? Will the transformer step the voltage UP?? Like I said, I thought it would not...but someone recently corrected me and said it will. Anyone know for sure??Thanks!
 
Engineering news on Phys.org
Depending on how you have it wired, yes.

the transformers work in both directions, and chances are the 220v line feeding your house feeds several others as well at a common connection point.


if you have your inverters directly tied to the incomming panel, you really need to install proper equipment before that setup injures or kills a serviceman.
 
Thank you. Interesting. I did not know the transformer at the pole works both ways...or that the 220vac at my house is on the same line as other homes on the street (possibly).
 
Last edited:
Some meters are one way only. Most I have run across are 2 way (rotary)

your 125VAC is half the leg of a 220v line.. it can still backfeed that single phase back into the grid in case of a power outage.

automatic shutoff or "islanding" islanding is where the inverter passes through the grid power, but if the grid goes away it keeps supplying power to the house but not back to the utility.

Yes, most AC systems can run in reverse,the chances of you powering your block without the inverters shutting down for overload are pretty slim, but there are pretty strict codes related to systems like yours that dictate the type and how the equipment is installed, and most require a seprate disconnect on the outside of your home for the utility to use, like if they need to work on the local lines they WILL come flip off your power through that disconnect in case your transfer system malfunctions and keeps the lines live while they are working.

a lot of people do what you describe, and if you get caught with an unauthorized setup it will be quite a headache for you.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top