Can Anyone Explain the Volumetric Tube Construction on a Hydraulic Bench?

AI Thread Summary
The discussion revolves around understanding the volumetric tube construction on a hydraulic bench, specifically how it functions with a plunger to stop water flow to the sump. The user expresses frustration after spending hours trying to grasp the concept without success. They seek clarification on the construction and operational mechanics of the volumetric tube in relation to the hydraulic bench setup. Additional context about the specific experiment being conducted on the bench is requested to provide better assistance. The conversation highlights a need for clearer explanations of hydraulic bench components in fluid dynamics experiments.
Naumaan
Messages
9
Reaction score
0
Hi guys,
hope all are fine. i m new here and don't know much about the rules.
well according to the question i have, i thought its the right place.
i ll never mind if it is moved.
anyways
today i studied the simple laboratory hydraulic bench...
i got struck in the part where plunger is used to stop the flow of water to the sump and the volumetric tube measures the volume
i can't understand the construction and working of volumetric tube with plunger in connection...i have wasted many hours on this but couldn't figure it out
pleasezz help me ....anyone
 
Engineering news on Phys.org
the figure of the bench i mtalking about is shown in the following link
http://www.sut.ac.th/cste/Oldweb/tools/itl/me/fm/bench.jpg
dont know how to attach a picture
 
Last edited by a moderator:
Since this picture is taking forever and a day to load, can you be a bit more specific on what you are doing on the bench? What is your experiment about?
 
tell me about the hydarulic bench for fluid dynamics
 

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

It all began with an end - New theory on origin and future of the universe
Replies
10
Views
6K
Why are we here? What I have learned
Replies
4
Views
4K
Mathematica This Week's Finds in Mathematical Physics (Week 236)
Replies
7
Views
3K
Mathematica This Week's Finds in Mathematical Physics (Week 236)
Replies
9
Views
4K
ECONOMICS: It's stupid to be afraid (Lee Kuan Yew to Der Spiegel)
Replies
6
Views
4K

Hot Threads

Recent Insights

Back
Top