Can Ferrofluids Withstand 50 Psi Pressure?

AI Thread Summary
Ferrofluids typically consist of water or organic solvents, which generally do not withstand pressures as high as 50 Psi. The strength of ferrofluids is influenced by the magnetic field, but their pressure resistance is limited. Most available ferrofluids are rated for pressures around 4-6 Psi, making 50 Psi significantly higher than standard specifications. The discussion highlights a lack of existing ferrofluids capable of withstanding such pressure levels. Further research into specialized formulations may be necessary to find a suitable ferrofluid for this application.
alibaba2
Messages
31
Reaction score
0
Hi to everyone,
i wanted to ask if a ferrofluid exist that can withstand a pressure of 50 Psi? Does the "strenght" of the liquid depend on the strenght of the magnetiv field?
Are there any such ferrofluids, or is this too much for the fluids available on the market?

Thanks
 
Physics news on Phys.org
Anybody?:smile:
 
Ferrofluids are typically based on water or some organic solvent. Why would either of these liquids not withstand 50 Psi of pressure? What are you asking about "strenght" of the liquid"? It is not possible to give an answer to a question that doesn't make any sense. Please re-try.

The word is spelled strength. Have you done a Google search for ferrofluids yet? Have you read the description of ferrofluids in Wikipedia?
 
Yes, i have. Everywhere the quotes PSi is in the range of 4-6 PSI. I have never read anywhere of higher psi. That is the reason i am asking.
 

Thread 'Derivation of Hamilton's Principle: Questions'

I have recently been really interested in the derivation of Hamiltons Principle. On my research I found that with the term ##m \cdot \frac{d}{dt} (\frac{dr}{dt} \cdot \delta r) = 0## (1) one may derivate ##\delta \int (T - V) dt = 0## (2). The derivation itself I understood quiet good, but what I don't understand is where the equation (1) came from, because in my research it was just given and not derived from anywhere. Does anybody know where (1) comes from or why from it the...
View full post »

Similar threads

How could I make it so ferrofluid drops do not coalesce?
Replies
1
Views
170
I Force exerted by an iron core electromagnet on a ferrofluid
Replies
2
Views
2K
PressureDrop/Pressure/Volumetric flow rate calculation (in a Pipe)
Replies
5
Views
4K
Can a Steel Vessel Contain Liquid Hydrogen at 15,000 PSI and 25C?
Replies
1
Views
2K
Question regarding pressure and energy
Replies
5
Views
2K
Low Viscosity Oil, Tanks, Pressure Relief Valves and Check Valves
Replies
2
Views
1K
Can Objects Float in Ferrofluid Using Electromagnets?
Replies
1
Views
4K
How Does Pressure Affect Dissolved Oxygen in Water Systems?
Replies
4
Views
2K
Is cavitation worse at depth? (Fluid pressure and Vapor pressure boiling)
Replies
4
Views
3K
A Effective Spring Constant of a Chain Polymer
Replies
2
Views
3K

Hot Threads

Recent Insights

Back
Top