Can I draw a helical coil in MAXWELL 3D using PF and ANSYS?

AI Thread Summary
Drawing a helical coil in Maxwell 3D can be challenging for new users, particularly in connecting the two tubes in 3D space. Users are seeking guidance on how to effectively utilize the software for this purpose. There is a reference to mathematical concepts related to helix angles, which may aid in understanding the design. Visual aids, such as images of the imported model, are shared to illustrate the issue. Clear instructions or tutorials on creating helical coils in ANSYS Maxwell 3D would be beneficial for users facing similar difficulties.
ATTAB
Messages
2
Reaction score
0
I'm a new user to both PF & Maxwell 3D. I've been having a lot of problems trying to draw a helical coil in Maxwell 3D v11.

the problem is how to connect the two tub in 3D
here is the image imported MAXWELL 3Dhttps://physicsforums-bernhardtmediall.netdna-ssl.com/data/attachments/63/63053-63dc021e4339b786d2340728c0b68d9f.jpg
 

Attachments

  • Capture.PNG
    Capture.PNG
    32.7 KB · Views: 509
Last edited by a moderator:
Engineering news on Phys.org
thank you but the problem is how drawing in software ANSYS maxwell in 3D
 

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
View full post »
Thread 'How can I find the cleanout for my building drain?'

Thread 'How can I find the cleanout for my building drain?'

I am a long distance truck driver, but I recently completed a plumbing program with Stratford Career Institute. In the chapter of my textbook Repairing DWV Systems, the author says that if there is a clog in the building drain, one can clear out the clog by using a snake augur or maybe some other type of tool into the cleanout for the building drain. The author said that the cleanout for the building drain is usually near the stack. I live in a duplex townhouse. Just out of curiosity, I...
View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
View full post »

Similar threads

How can I draw a helical coil in Maxwell 3D v11 without getting an error?
Replies
3
Views
12K
Curved Mesh on Symmetry Boundary in ANSYS Maxwell 3D
Replies
2
Views
3K
Help with simulation in ANSYS Maxwell, 3D electromagnetism simulator
Replies
2
Views
6K
How Can 3D Software Enhance M.C. Escher Art Reproductions?
Replies
10
Views
2K
I could really use some help picking my optional module [GameDev]
Replies
2
Views
2K
I Request for Input: 2D Minkowski Spacetime Diagram Generator
Replies
6
Views
2K
How can I simulate a helix coil with current in COMSOL Multiphysics?
Replies
3
Views
7K
A Physical Understanding of Kirchhoff's Laws
Replies
18
Views
3K
How Does ANSYS v12 Enhance Rotordynamic Analysis?
Replies
23
Views
37K
Current and Future AI Threats to Humanity and the Human Response
Replies
10
Views
4K

Hot Threads

Recent Insights

Back
Top