Can School Libraries Provide Urgently Needed Academic Publications?

  • Thread starter Thread starter firakti
  • Start date Start date
  • Tags Tags
    Articles
AI Thread Summary
The discussion centers on the urgent need for two specific academic publications related to non-crimp fabric composites. The requester has already searched for these articles without success and is seeking assistance from others. There is a suggestion to check the school technical library for availability. Additionally, it is noted that if the publications are copyrighted, only the authors can share them. The conversation highlights the challenges in accessing specialized academic resources.
firakti
Messages
2
Reaction score
0
Need two articles very urgently

hi, I need "Miller AJ. The effect of microstructural parameters on the mechanical properties of non-crimp fabric composites. M. Phil thesis, Cranfield University, School of Industrial and Manufacturing Science, August 1996" and "developing multiaxial non-crimp reinforcements for the cost effective solution in 31st international SAMPE technical conference" very very urgently. i'd appreciate it if somebody can find them and send to me. thanks.
 
Engineering news on Phys.org


How about looking for them yourself?
 


i have already search for them, but couldn't get any results. on the other hand, if i had found them, i wouldn't have written a post here.
 


firakti said:
i have already search for them, but couldn't get any results. on the other hand, if i had found them, i wouldn't have written a post here.

Does your school technical library have them? Also, if they are copyrighted publications, only the authors can "send" them to you.
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

How can we improve the safety of school/tour buses in the event of a collision?
Replies
10
Views
4K
News Bush Honest & Trustworthy Until How Many Lies?
2
Replies
65
Views
10K

Hot Threads

Recent Insights

Back
Top