Cantilever Help - Finishing Work & Getting Results

  • Thread starter Thread starter {(AB)}
  • Start date Start date
  • Tags Tags
    Cantilever
AI Thread Summary
The discussion focuses on seeking assistance with finishing work on cantilevers and understanding how their movement affects circuit resistance when using strain gauges. The user mentions utilizing a Wheatstone bridge for their experiments and requests hints for writing up their findings. A participant questions the feasibility of sending experimental results and suggests asking specific questions for more effective help. The conversation emphasizes the need for clarity in inquiries to facilitate better support. Overall, the thread highlights the challenges of documenting experimental results in cantilever research.
{(AB)}
Messages
1
Reaction score
0
Cantilever help!§

heh everyone

finishing of some work on cantilevers and how the movement (when attached to strain gages) affects the circuits resistance, i used a wheatsone bridge and i need some hints for help on the right-up... or any results you could send my way would be great, thanks

{(AB)}:bugeye:
 
Physics news on Phys.org
How can someone send you results for experiments you did? How about asking a specific question and we can help you that way.
 

Thread 'Is calling fictitious forces "not real" just about terminology?'

Hi there, im studying nanoscience at the university in Basel. Today I looked at the topic of intertial and non-inertial reference frames and the existence of fictitious forces. I understand that you call forces real in physics if they appear in interplay. Meaning that a force is real when there is the "actio" partner to the "reactio" partner. If this condition is not satisfied the force is not real. I also understand that if you specifically look at non-inertial reference frames you can...
View full post »

Thread 'Derivation of Hamilton's Principle: Questions'

I have recently been really interested in the derivation of Hamiltons Principle. On my research I found that with the term ##m \cdot \frac{d}{dt} (\frac{dr}{dt} \cdot \delta r) = 0## (1) one may derivate ##\delta \int (T - V) dt = 0## (2). The derivation itself I understood quiet good, but what I don't understand is where the equation (1) came from, because in my research it was just given and not derived from anywhere. Does anybody know where (1) comes from or why from it the...
View full post »

Similar threads

Likely very simple Beam calcs...
Replies
4
Views
523
Request For a Set of Eyes on an Oscillating Steel Cantilever
Replies
1
Views
1K
Determining Reactions for Cantilever and Simply-Supported Beam Loads
Replies
4
Views
3K
Need help with more indepth beam theory?
Replies
1
Views
1K
Mechanical Advantage on Gym Machines
Replies
3
Views
220
Cantilever Beam Failure as a function of Force Applied to Free End
Replies
4
Views
20K
Help An issue with a cantilever tube instrumented with strain gauges.
Replies
4
Views
4K
Calculating the resistance in a compensating circuit for a thermocouple
Replies
8
Views
2K
Airplane wings -- How do they work and why do they change shape?
2
Replies
81
Views
11K
Is My Thyristor Gate Driver Circuit Malfunctioning Due to Component Issues?
Replies
12
Views
2K

Hot Threads

Recent Insights

Back
Top