Capacitor with Irregular size dielectric

AI Thread Summary
It is feasible to create a capacitor with a dielectric that does not match the size of its conducting plates. The discussion raises questions about the practical benefits of such a design. One proposed application involves using a car window as the dielectric in a security alarm system, where breaking the glass alters capacitance and triggers the circuit. This approach highlights the potential for cost-effective construction without strict size tolerances. Capacitive sensing is identified as a relevant technique for this application.
TenJuu
Messages
2
Reaction score
0
Is it possible to make a capacitor with a dielectric not of the same size with its conducting plates?
 
Physics news on Phys.org
Welcome to the PF. :smile:
TenJuu said:
Is it possible to make a capacitor with a dielectric not of the same size with its conducting plates?
Sure. But can you think of any practical reason why you would WANT to do that? What kind of dielectric change like you suggest would make the capacitor better in some way?
 
  • Like
Likes TenJuu
Well it certainly would be cheaper to construct if you don't require tight tolerances...
 
  • Like
Likes TenJuu
berkeman said:
Welcome to the PF. :smile:

Sure. But can you think of any practical reason why you would WANT to do that? What kind of dielectric change like you suggest would make the capacitor better in some way?
We are having research on making a security alarm with low technology. By making the car window as our dielectric and having small conducting plates sandwiching it. When the glass is broke it will cause a change in capacitance thus triggering our circuit.
 

Thread 'Reflections at the source point of a transmission line'

I was using the Smith chart to determine the input impedance of a transmission line that has a reflection from the load. One can do this if one knows the characteristic impedance Zo, the degree of mismatch of the load ZL and the length of the transmission line in wavelengths. However, my question is: Consider the input impedance of a wave which appears back at the source after reflection from the load and has traveled for some fraction of a wavelength. The impedance of this wave as it...
View full post »

Similar threads

I Why is a Dielectric slab ejected from the capacitor when energized?
Replies
10
Views
2K
I Is capacitor energy the electrostatic energy of the whole system?
Replies
9
Views
2K
B Will My DIY Capacitor Light Up a 6VAC Bulb in Series?
Replies
12
Views
2K
What happens to the capacitor and dielectric when an old phone charges faster?
Replies
21
Views
2K
A capacitor with two dielectrics in series
Replies
6
Views
6K
Electron path in the presence of a dielectric
Replies
15
Views
2K
A An electrolytic capacitor keeps charging by itself
Replies
14
Views
2K
I Calculating Total Electric Charge with a Capacitor and Battery
Replies
42
Views
4K
Energy changes upon insertion of a solid dielectric in a capacitor
Replies
2
Views
2K
Help clarifying capacitors, dielectrics, E field, potential
Replies
2
Views
1K

Hot Threads

Recent Insights

Back
Top