Centre of gravity for multiple objects

AI Thread Summary
The discussion revolves around calculating the center of gravity for a framework with four crates, each weighing 52kg. Initially, the poster calculated the center of gravity to be 3.8m from point A, but was corrected on their math, realizing the left side of their equation should total 21m instead of 19m. After reevaluating, they determined the correct center of gravity to be 5.25m from point A, which aligns with the balance point of the system. The importance of using diagrams and understanding the balance-point rule in physics is emphasized to avoid simple calculation errors. Overall, the conversation highlights the significance of accurate calculations and visual aids in solving physics problems.
aab234
Messages
3
Reaction score
0
Hi. This is my first post so apologies if I do anything wrong.

I have a homework question.

*calculate the distance of the centre of gravity from support A for a framework containing 4 crates at 52kg per crate.

I'll describe the diagram:

A is on the far left. 3m from A are 2 crates stacked on each other (so 104kg), 6m from A there is another crate, then another crate at 9m from A.
I'm disregarding support B at 12m from A.

My answer is that as the crates ate the same mass, we'll call them m.
I'll use x as the unknown distance I'm looking for. So:

3 (2m) + 6 (m) + 9 (m)

19m = 5mx
x = 3.8m

So the centre of gravity is 3.8m from point A.
Am I correct?

As I've seen pop up a few times on here I'm studying with ICS and they're...a little lacking in quality educational material so I've had to work it out on my own so if I'm shockingly incorrect a point in the right direction would be great.

Thanks.
 
Physics news on Phys.org
Welcome to PF;
Does the answer make sense?

All masses are in a line? ... imagine they are sitting on a beam and don't worry about the supports for now.
The center of gravity is the position x where you would put a pivot and the beam would balance.

x=3.8m is 0.8m to the right of the 2 stacked crates ... a single crate 1.6m on the other side would balance it, but you have two crates much further away than that so the whole thing tips over clockwise.

If you sketch it out to scale and draw in a pivot at your value for x, you intuition should tell you the same. The same intuition should give you an idea of where the pivot should go, which will tell you if your maths comes out right.
 
You analyzed it pretty OK, but you have to do the math correctly. The left hand side of your equation should be 21m, and the right hand side should be 4mx (you only had 4 crates, not 5).

Incidentally, Welcome to Physics Forums!

Chet
 
Doh! Maybe I should learn to add up first. Sigh...

So let's try that again.
3 (2m) + 6 ( m ) + 9 ( m )
21m = 4mx
x = 5.25

I've drawn a diagram and 5.25 metres from A as a fulcrum looks like it world balance so I think this is right.

Thanks for the help guys. I'll return the favour one day, when I've learned to add up obviously. How embarrassing.
 
*Would balance.

Seems I can't spell either. Not my finest hour I have to say.
 
2am effect? - have another coffee ;)
I've drawn a diagram and 5.25 metres from A as a fulcrum looks like it world balance so I think this is right.
... diagrams are the backbone of physics :)

If you rely too much on remembering equations, you cna get tied up in simple mistakes like this.
If you remembered about the balance-point rule, that wouldn't happen. Also you would not need to memorize the equation. Just remember that the sum of the moments must be zero.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top