Combining DC Generators for Increased Voltage Output

AI Thread Summary
To achieve a 12V output using two 6V DC generators, they can be connected in series, which will double the voltage while maintaining the same current rating. This method is similar to connecting batteries in series, where two 1.5V batteries create a 3V output. The series connection is a straightforward solution for the project constraints mentioned. This approach is effective for maximizing voltage output in limited space. Proper wiring and connections are essential for successful implementation.
Moncada
Messages
2
Reaction score
0
Hi guys,

I'm working on a school project and I don't know a lot about electricity, so here is my question. Let's say that I have two small 6V DC generators, and I need an output of 12V (I can not use a 12V DC generator because space is limited, the two 6V fit perfectly) is there a way to combine my two sources, can anyone tell me how or point me into the right direction?
 
Physics news on Phys.org
Moncada said:
Hi guys,

I'm working on a school project and I don't know a lot about electricity, so here is my question. Let's say that I have two small 6V DC generators, and I need an output of 12V (I can not use a 12V DC generator because space is limited, the two 6V fit perfectly) is there a way to combine my two sources, can anyone tell me how or point me into the right direction?

Welcome to the PF.

If they are DC generators, just hook them up in series. You will get twice the output voltage at the same current rating as a single generator. :smile:
 
That's right, think of them like batteries.
If you put two 1.5v batteries in series, you got a 3v battery!
 

Thread '1:1 versus 2:1 Mechanical Advantage debate'

The rope is tied into the person (the load of 200 pounds) and the rope goes up from the person to a fixed pulley and back down to his hands. He hauls the rope to suspend himself in the air. What is the mechanical advantage of the system? The person will indeed only have to lift half of his body weight (roughly 100 pounds) because he now lessened the load by that same amount. This APPEARS to be a 2:1 because he can hold himself with half the force, but my question is: is that mechanical...
View full post »

Thread 'Average velocity as a weighted mean'

Hello everyone, Consider the problem in which a car is told to travel at 30 km/h for L kilometers and then at 60 km/h for another L kilometers. Next, you are asked to determine the average speed. My question is: although we know that the average speed in this case is the harmonic mean of the two speeds, is it also possible to state that the average speed over this 2L-kilometer stretch can be obtained as a weighted average of the two speeds? Best regards, DaTario
View full post »

Thread 'Newton's first law?'

Some physics textbook writer told me that Newton's first law applies only on bodies that feel no interactions at all. He said that if a body is on rest or moves in constant velocity, there is no external force acting on it. But I have heard another form of the law that says the net force acting on a body must be zero. This means there is interactions involved after all. So which one is correct?
View full post »

Similar threads

Increasing the output torque of a DC motor with gears
Replies
16
Views
4K
Ohm's Law - Finding Source Voltage
Replies
3
Views
1K
How to measure the output of a generator
Replies
12
Views
3K
Is a Larger DC Motor Needed for Low Wind Speed Power Generation?
Replies
34
Views
4K
Measuring Power output of DC generator
Replies
38
Views
4K
12V DC Motor in Light Fixture with Dimmer & 12V DC to 110V AC Inverter
Replies
21
Views
2K
Power Output Given Certain Torque
Replies
7
Views
2K
Troubleshooting 12v DC Motor for Final Year Project Prototypes
Replies
1
Views
278
Help my understanding of DC generators please
Replies
13
Views
3K
Submarine noise level reduction, stealth question
Replies
9
Views
2K

Hot Threads

Recent Insights

Back
Top