Is My Comparator Circuit Textbook Explanation Incorrect?

AI Thread Summary
The discussion centers on a homework question regarding a comparator circuit from a textbook. The poster expresses confusion about the circuit's operation, specifically questioning the textbook's explanation of how the output voltage behaves when the reference voltage is set at 4V. They argue that if the non-inverting input (V+) is fixed at 4V, the output should be negative when the inverting input (V-) is equal to or greater than 4V, contradicting the requirement for the LED to light. Other participants confirm that the textbook is incorrect, clarifying that the comparator output is high when the non-inverting input exceeds the inverting input. This resolution alleviates the poster's concerns about their understanding of the circuit.
Jimmy87
Messages
692
Reaction score
19

Homework Statement


We have to answer questions from a particular circuit (comparator) in our textbook for homework. The circuit is attached to this thread. I haven't started the questions yet as I don't even understand the circuit! Based on my notes I think my textbook is wrong and would appreciate it if someone could glance at the attachment and confirm or deny the case.


Homework Equations


Open loop gain = A (V+ - V-) where V+ is the non-inverting input, V- is the inverting input of the op-amp and A is the amplification factor.

The Attempt at a Solution


Where it says next to the diagram "suppose we want the reference voltage to be 4V. This would mean that the LED would light when the input voltage is equal to or greater than 4V". This is what I think is wrong:

This means V+ (non-inverting input) is fixed at 4V. If Vin (which is V-) is equal to or greater than this then according to the open loop gain equation, the output voltage would be negative. This means that the anode of the diode is negative which means no current will flow. From my class notes it says the anode must be positive for a diode to light.

So either my class notes are wrong or the textbook is wrong? Huge thanks to anyone that can help me with this!
 

Attachments

  • Comparator Circuit.png
    Comparator Circuit.png
    14.1 KB · Views: 557
Physics news on Phys.org
You are correct and the book is wrong. The comparator output goes high when the + input is higher than the - input. Or said differently, the output is high when the - input is below the + input.
 
  • Like
Likes 1 person
Phew! Thought I was missing something. Thank you berkeman!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top