Compressed Spring & Acid: E.P.E Impact & Reasons Explained

AI Thread Summary
When a compressed spring is dissolved in acid, its elastic potential energy (E.P.E) is converted into thermal and sound energy due to the chemical reaction. The process adheres to the law of conservation of energy, which states that energy can only change forms. As the spring breaks down, it generates heat, contributing to thermal energy release. Additionally, the reaction may produce sound energy, such as popping or hissing noises. Ultimately, the dissolution of the spring results in the transformation of its stored energy into other energy forms.
stupidkid
Messages
18
Reaction score
0
a compressed spring is completely dissolved in acid what will happen to the elastic potential energy of the spring? With reasons.
I think that the E.P.E will have an effect on the heat released but I still don't have backup. I am still not so advanced.
 
Last edited:
Physics news on Phys.org
Looks like homework...

What are your opinions ?
 


If a compressed spring is completely dissolved in acid, the elastic potential energy (E.P.E) of the spring will be converted into other forms of energy such as thermal energy and sound energy. This is because the acid will react with the material of the spring, causing it to break down and release its stored energy.

The conversion of E.P.E into thermal energy can be explained by the law of conservation of energy. This law states that energy cannot be created or destroyed, but it can be converted from one form to another. In this case, the energy stored in the compressed spring is being converted into thermal energy as the chemical reaction between the acid and the spring's material produces heat.

Additionally, the dissolution of the spring in acid will also result in the release of sound energy. As the spring breaks down and reacts with the acid, it may produce a popping or hissing sound due to the rapid release of energy.

In conclusion, the E.P.E of a compressed spring will be converted into thermal and sound energy when it is dissolved in acid. This is due to the chemical reaction between the two substances, which causes the spring to break down and release its stored energy.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top