Conservation of energy and momentum homework

AI Thread Summary
In an elastic collision involving a 2.0 kg ball at rest and a 5.0 kg ball moving at 10.0 m/s, conservation of momentum and energy principles must be applied to find the final speeds of both balls. The initial momentum and kinetic energy of the system should be calculated before the collision, and then set equal to the final momentum and kinetic energy after the collision. The equation v1 = 2m1/(m1 + m2) is not correctly formatted for this scenario, as it does not account for the initial velocities. Two equations will be derived from the conservation laws to solve for the unknown velocities of both balls. Proper units for speed must also be ensured throughout the calculations.
tica86
Messages
79
Reaction score
0
A 2.0 kg ball at rest is struck head-on by a 5.0 kg ball moving along a track at 10.0 m/s in an elastic collision. What is the speed of the 5.0 kg ball and the 2.0 kg ball after the elastic collision?

----I'm sure this is a pretty simple question but I don't where to start.
Is the following equation correct?

v1= 2m1/m1+m2 ?

please help
 
Physics news on Phys.org


tica86 said:
v1= 2m1/m1+m2 ?

What are the units of speed? Does the RHS of this equation have those units?

You will need to use conservation of energy and momentum to solve this. Compute the momentum and energy of the system before and after the collision, using symbols to represent the unknown velocities. You will have 2 equations to solve for the 2 unknown speeds.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

Speed of charged balls after collision
Replies
13
Views
1K
Solving the Elastric 3-Body Collision Problem
Replies
2
Views
2K
Solving Elastic Collision of Two Balls: Theory & Solutions
Replies
15
Views
3K
Final speed and direction after a collision (elastic+inelastic)
Replies
16
Views
5K
Conservation of Momentum (elastic collision of masses)
Replies
15
Views
7K
Elastic head-on collision problem
Replies
8
Views
2K
Elastic Collision and Momentum of Ice Skaters
Replies
16
Views
3K
Physics Help with elastic collision
Replies
5
Views
2K
A bullet collides perfectly elastically with one end of a rod
Replies
21
Views
2K
Elastic collision with pendulum
Replies
4
Views
5K

Hot Threads

Recent Insights

Back
Top