Counterbalanced Drive Mechanism - Purpose & How it Works

  • Thread starter Thread starter stan
  • Start date Start date
  • Tags Tags
    Drive
AI Thread Summary
An eccentric counterbalanced drive mechanism produces an orbiting motion rather than pure rotation, which is essential for applications requiring vibration or separation. This mechanism includes a counterbalance to reduce the imbalance created by its design. Common uses include vibrational polishing machines, shakers, and separators. While similar to a crankshaft in a car engine, the output of the eccentric drive is distinct due to its orbital motion. Understanding this mechanism is crucial for applications in various industrial machines.
stan
Messages
18
Reaction score
0
Hi,

i was wondering what is a eccentric counterbalanced drive mechanism, i could not find any pictures of this particular mechanism..

can anybody explain how it works and what is its purpose?


stan
 
Engineering news on Phys.org
I don't have any source for a picture, but the idea is that the eccentricity produces an orbiting instead of pure rotation. The counterbalance is required to minimize the out of balance created by this configuration. I have seen them mostly used on machines that are shakers and seperators. We have a vibrational polishing machine here that uses one. I'll keep looking for pictures though.
 
The first thing that comes to mind is the crankshaft in a car engine, but I'm not sure if that's what you're talking about because the output is smooth. I believe that orbital sanders and floor polishers use an eccentric drive as well.
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

Automotive Engine mechanisms during coasting (in drive mode) and engine braking
Replies
10
Views
3K
Force required to drive a fence post into soil
Replies
9
Views
2K
Automotive What particular mechanic or engineer does this work?
Replies
4
Views
1K
Calculate drive torque for rotating large drums
Replies
12
Views
3K
My weird geneva mechanism doesn't work. Looking for suggestions
Replies
3
Views
2K
Pistons have cracked and put a hole in the block
Replies
20
Views
4K
Friction Drive Bicycle -- Required Torque
Replies
17
Views
4K
How to begin in studying Mechanics and ME?
Replies
16
Views
1K
Designing a Geneva Mechanism: Overcoming Challenges
Replies
5
Views
3K
Motor specifications to drive Motorcyle Carousel
Replies
1
Views
1K

Hot Threads

Recent Insights

Back
Top