Crazy Pulley Problem: Solve for Distance, Acceleration & Tension

AI Thread Summary
The discussion revolves around a physics problem involving a 17 kg block and a 5.9 kg block connected by a massless string over a pulley. Participants emphasize the importance of drawing free-body diagrams to analyze the forces acting on both blocks, particularly focusing on the relationship between their accelerations. The tension in the string is consistent throughout due to the massless and frictionless nature of the pulleys. Key equations derived include 2T = 17a for the block on the table and 5.9g - T = 5.9a for the hanging block. Understanding these relationships is crucial for solving the problem regarding distance, acceleration, and tension.
spursfan2110
Messages
19
Reaction score
0

Homework Statement



Part 1:

A 17 kg block with a pulley attached slides along a frictionless surface. It is connected by a massless string to a 5.9 kg block via the arrangement shown (attached below). The acceleration of gravity is 9.81 m/s/s. Find the horizontal distance the 17 kg block
moves when the 5.9 kg block descends a distance of 9.3 cm. The pulleys are massless and
frictionless. Answer in units of cm.

Part 2:

Find the acceleration of the 17 kg block. Answer in units of m/s/s.

Part 3:

Find the tension in the connecting string. Answer in units of N.

Homework Equations



F = ma



The Attempt at a Solution



I am absolutely stumped on all three...I don't want someone to solve this for me, but any little hint to get me started would be great. My main problem is that none of the equations I have have anything to do with distance and so I don't know how to relate that to these forces and acceleration.
 

Attachments

Last edited:
Physics news on Phys.org
Draw a free-body diagram of the two masses of interest. Note that there is a relationship between accelerations of the two masses, I think one is twice the other.
 
Ok, I've drawn the diagram for the hanging mass, and with T being an upward force and mg being a downward force, ma being mg -T, but I am really confused about the mass on the table. Gravity and the normal force cancel each other out obviously, and are there two tension forces acting on it as well?
 
Since single string is connecting the two masses, the tension is each segment of the string must be equal.
So m2*a = ...? Here m2 = 17 kg
 
Since the first pulley(the smaller one) is physically connected to the first block, you have to treat the pulley as being a part of the block. So the force experienced by the (block+small pulley) is 2T while the tension force in the other block is only T. Remember that tension in the string is the same throughout since all pulleys are said to be massless and frictionless.
2T = 17 a
and
5.9*g - T = 5.9*a
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top