Distance of a satellite from earth

  • Thread starter Thread starter skiing4free
  • Start date Start date
  • Tags Tags
    Earth Satellite
AI Thread Summary
To calculate the height of a satellite from Earth based on a microwave signal received 68 ms after transmission, one can use the relationship between speed, time, and distance. The speed of light is approximately 3 x 10^8 m/s, leading to a calculated height of about 20.4 million meters, or roughly 12.7 to 9.3 thousand miles, depending on the satellite's position. The initial confusion stemmed from overcomplicating the problem, as the solution is straightforward once the correct equation is applied. This highlights the importance of focusing on fundamental principles in physics. The discussion emphasizes that sometimes problems may seem complex but can be resolved with basic calculations.
skiing4free
Messages
20
Reaction score
0
Distance of a satellite from earth...

Homework Statement


A microwave signal is received from a satellite in orbit round earth, 68 ms after it was transmitted from the satellite. Calculate the height of the satellite?

This sounds like such a simple questions and i reckon it is except i always seem to get stumped... I first tried to figure out the angular velocity of the satellite but you don't know enough information to calculate that, then i kept going round in circles? What am i missing??
A poke in the right direction would be very appreciated...
 
Physics news on Phys.org


The problem is much simpler than you are thinking!

You know the Speed of the signal (c), and you know the time it took to get down to earth. What equation most simply relates speed and time with the variable you are looking for?
 


According to my calculations it's indeterminate, but somewhere between 12.7 and 9.3 thousand miles away, to be determined by position in the sky.
 


h=ct and c=3x10^8 so h=2.04x10^7m Thanks Gib Z
wow that was incredibly easy! jezz i really need think a bit more
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top