What are some factors that affect the drying time of table utensils?

In summary, the 2011 iypt problem Air Drying involves investigating how the drying time of washed table utensils is affected by relevant parameters. Some possible parameters to consider are the materials used, such as glass, plastic, acryl, wood, ceramic, and stainless steel, as well as the temperature and thermal mass of the utensils after being rinsed. Additionally, the geometries of the utensils should be evaluated, as they can impact the drying process through convective and natural diffusion. Obstructions and surface areas can also affect diffusivity, leading to variations in drying time.
  • #1
jangheej
19
0
hi =)
i'm doing an experiment on 2011 iypt problem Air Drying.
-> "table utensils, after being washed, dry differently. Investigate how the drying time depends on relevant parameters."

I've just begun on the experiment and have difficulty figuring out where to start!
I'm thinking about measuring the drying time depending on different material(glass, plastic, acryl, wood, ceramic, stainless steel).

What else could be a "relevant parameter"?
Can you suggest some ideas??
 
Engineering news on Phys.org
  • #2
How about the temperature of the utensils after they are rinsed, and their thermal mass? A heavy ceramic plate that emerges from the rinse very hot should dry quickly.
 
  • #3
You should definitely evaluate the geometries of the utensils, since the drying will occur by convective and natural diffusion as the small pools of water expel their vapor pressures. More convection means higher diffusivity, which is a direct result of geometrical obstructions and/or greater surface areas.
 

What is the purpose of a drying dish experiment?

The purpose of a drying dish experiment is to observe and measure the rate at which water evaporates from a dish under different conditions. This experiment can be used to study factors such as temperature, humidity, and surface area that affect the rate of evaporation.

What materials are needed for a drying dish experiment?

The materials needed for a drying dish experiment include a dish, water, a timer, a thermometer, and a source of heat (such as a hot plate or lamp). Other optional materials may include a hygrometer to measure humidity and different types of dishes to compare results.

How do you set up a drying dish experiment?

To set up a drying dish experiment, fill a dish with a measured amount of water and place it on a level surface. Record the initial temperature and humidity levels. Then, place the dish in a controlled environment (such as a room with a constant temperature) and start the timer. Record the time it takes for the water to completely evaporate and measure the final temperature and humidity levels. Repeat the experiment multiple times for accurate results.

What are the variables in a drying dish experiment?

The variables in a drying dish experiment include the independent variable (the factor being changed, such as temperature or humidity), the dependent variable (the factor being measured, such as the rate of evaporation), and control variables (factors that are kept constant, such as the type of dish and the initial amount of water).

What are some possible sources of error in a drying dish experiment?

Possible sources of error in a drying dish experiment include human error in measuring and recording data, variations in the controlled environment, and the presence of air currents that may affect the rate of evaporation. It is important to repeat the experiment multiple times and take the average to reduce the impact of these errors on the results.

Similar threads

Anyone preparing/prepared for the IYPT?
    • Advanced Physics Homework Help
Replies
1
Views
1K
Building a Model Car: Maximizing Efficiency with Newton's Law
    • Introductory Physics Homework Help
Replies
9
Views
1K
Experiment about reaction times & result analysis
    • Biology and Chemistry Homework Help
Replies
2
Views
848
I Is there new LHC data on coupling constant running?
    • Beyond the Standard Models
Replies
1
Views
2K
I What false hints of new physics were most notable?
    • Beyond the Standard Models
Replies
30
Views
7K
Surface roughness in 2D sinusoidal corrugation
    • Mechanical Engineering
Replies
1
Views
3K
I Muon g-2 as a constraint on new physics
    • Beyond the Standard Models
Replies
18
Views
3K
What Unique Variables Can Affect the Resonant Frequency in a Physics Experiment?
    • Introductory Physics Homework Help
Replies
6
Views
5K
Glass Lens affects Magnetic Fields?
    • Electromagnetism
Replies
23
Views
17K
I Testing string/m-theory extra dimensions prediction
    • Beyond the Standard Models
Replies
10
Views
2K

Hot Threads

Recent Insights

Back
Top