I Dust sticking to fan blade downstream of rivet head

  • I
  • Thread starter Thread starter Swamp Thing
  • Start date Start date
  • Tags Tags
    Dust Fan Head
AI Thread Summary
Dust accumulates on fan blades downstream of rivet heads due to reduced pressure and airflow velocity in those areas, creating a comet-tail effect. This phenomenon contradicts Bernoulli's principle, which states that an increase in velocity should lead to a decrease in pressure, causing confusion among observers. Flat-headed rivets are less common and contribute to turbulence, drawing air into low-pressure zones. Recessed rivets, while more costly, enhance aerodynamic efficiency by increasing speed and reducing fuel consumption. Understanding these dynamics is crucial for optimizing aircraft design and performance.
Swamp Thing
Insights Author
Messages
1,031
Reaction score
769
Why does dust stick to the fan blades just downstream of the rivet heads, forming a comet-tail like effect?

IMG_20220629_150011~2.jpg
 
Physics news on Phys.org
It is an area of turbulence, into which air is drawn by lower pressure.
Velocity may increase, but in a chaotic way and in circular trajectories.
Same should happen over the thick trailing edge of each wood or plastic blade.

Recessed rivets are more expensive, but those make top speed increase and fuel consumption decrease.
Please, see:
https://en.wikipedia.org/wiki/Hughes_H-1_Racer#Design

 
  • Like
Likes Swamp Thing and dlgoff
Thread 'Gauss' law seems to imply instantaneous electric field'
Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...

Similar threads

Back
Top