Can Refrigerators Have Greater Efficiency Than Theoretical Value?

  • Thread starter Thread starter Chronos000
  • Start date Start date
  • Tags Tags
    Efficiency
Chronos000
Messages
80
Reaction score
0

Homework Statement



the efficiency of a fridge is given by n=Q/W but this is actually the coefficient of performance.

normally the efficiency of an engine is n= W/Q.

the result i get for the coefficient of performance is 18.5 and my textbook says real fridges have coefficients of 4 or 5. you would think one over this value would give the actual efficiency. but if you do this then the efficiency of real fridges is greater than the theoretical one.

I clearly don't understand something here. also, can i derive the specific solution for any engine/fridge from a general form?
 
Physics news on Phys.org
The measure of efficiency is always output/input. In the case of the engine, you're taking heat Q from the hot reservoir and produce work W, so the efficiency is W/Q. In the case of the refrigerator (no D in refrigerator!), you're doing work W for the goal of removing heat Q from the cold reservoir, so the coefficient of performance is Q/W.
 
that makes sense. so the idea of getting a percentage efficiency doesn't exist for a fridge?
 
and I was sure I'd spelt it wrong haha
 
Right. But you could compare a real refrigerator to a Carnot refrigerator working between the same two temperature reservoirs. The Carnot refrigerator would extract the most heat for a given amount of work, so the fraction Qreal/QCarnot could be seen as a percentage efficiency, in the sense it measures how close the real refrigerator gets to being an ideal one.
 
thats great, thanks
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top